Conventional blow molding of 3D tubular shapes, such as filler pipes, air ducts, tubes used in household appliances, etc., can lead to welding seams at the pinch areas creating excessive flash that in some cases can weigh multiple times the weight of the finished part. Moreover, long pinch... Read More
Fully automatic control available* Self-adjusting operating range when reprocessing edge trim – no manual adjustments necessary* Low-key service and maintenance Minimal thermal damage to the reprocessed material Extremely low specific energy consumption Low noise emission (low sound level) Read More
New standard in consumer packaging The all-electric KBB series sets new consumer packaging standards not just in terms of the economy but also in terms of the operating convenience. During the development of the pioneering machine concept, the focus was upon the decisive requirements of the... Read More
With its many years of experience in building industrial blow molding machines, Kautex offers several machine series for the production of containers with up to 10,000 liters capacity as well as for the production of technical parts such as plastic fuel tanks. The direct-acting hydraulic... Read More
Shuttle Blow Molding Machines for technical Parts and Packaging Containers of up to 30 Liters Capacity (KCC) The standard KCC packaging series comprises of the KCC10, KCC20 and KCC30 singleclamp models and the double-clamp models KCC10-D and KCC20-D with up to two times ten cavities. The... Read More
Shuttle Blow Molding Machines for technical Parts and Packaging Containers of up to 30 Liters Capacity (KEB). Following the demands of the marketplace, Kautex Maschinenbau has consistently improved its globally successful KEB series machines. These blow molders are used for technical parts and... Read More
KR® TTS Titanium IV 2-propanolato, tris isooctadecanoato-O KR 7 Titanium IV bis 2-methyl-2-propenoato-O, isooctadecanoato-O 2-propanolato KR 9SQ Titanium IV 2-propanolato, tris(dodecyl)benzenesulfanato-O KR 12 Titanium IV 2-propanolato, tris(dioctyl)phosphato-O KR 26S Titanium IV... Read More
Neoalkoxy Titanates LICA® 01 Titanium IV 2,2(bis 2-propenolatomethyl)butanolato, tris neodecanoato-O LICA 09 Titanium IV 2,2(bis 2-propenolatomethyl)butanolato, iris(dodecyl)benzenesulfonato-O LICA 12 Titanium IV 2,2(bis 2-propenolatomethyl)butanolato, tris(dioctyl)phosphato-O LICA 38 Titanium... Read More
NZ® 01 Zirconium IV 2,2(bis-2-propenolatomethyl)butanolato, tris neodecanolato-O NZ 09 Zirconium IV 2.2(bis-2-propenolatomethyl)butanolato, tris(dodecyl)benzenesulfonato-O NZ 12 Zirconium IV 2,2(bis-2-propenolatomethyl)butanolato, tris(dioctyl)phosphato-O NZ 33 Zirconium IV... Read More
KA™ 301 Di-isobutyl(oleyl)aceto acetyl aluminate KA 322 Di-isopropyl(oleyl)aceto acetyl aluminate KA 489 A mixture of di-ester phosphato aluminum chelates Read More
Key Filters Continuous Belt Screen Changers Key Filters continuous screen changers deliver a continuous, uniform pressure, varying as little as ±20 PSI. Your process will be able to run at a constant rate and temperature, resulting in better product. Key Filters Manual Screen Changers The... Read More
The Kongskilde KIA12, KIA20 and KIA60 Aspiratorare designed to separate light impurities or dust from re-processed material or granulated plastic. The aspirator is suitable for applications where the presence of dust or label fragments can be expected, for example in connection with PET-bottle... Read More
Impact Modifier for PVC and ABS, suitable for PVC Window profiles, fence, board and plate. Description: Highest molecular weight, narrow molecular weight distribution, and good mechanical properties, widely used for rigid and semi-soft PVC products Read More
Impact Modifier for PVC and ABS Description: It is suitable for injection molding and provides additional impact resistance. Similar to Tyrin 7000 Pkg. - 25KG(55.115lb bags, 52 bags per pallet Shipping Point: Trenton NJ, Akron OH, Dalton GA (Contact your sales representative for... Read More
Impact Modifier for PVC and ABS Description: Special CPE used in ABS Products which have flame retardant properties. It is suitable for injection molding and provides additional impact resistance. Pkg. - 25KG(55.115lb bags, 52 bags per pallet Read More
Impact Modifier for PVC and ABS Description: It is suitable for injection molding and provides additional impact resistance. Similar to Tyrin 2500 Pkg. - 25KG(55.115lb bags, 52 bags per pallet Shipping Point: Trenton NJ, Akron OH, Dalton GA (Contact your sales representative for... Read More
Impact Modifier for PVC and ABS Description: It is suitable for injection molding and provides additional impact resistance. Similar as Tyrin 6000 Pkg. - 25KG(55.115lb bags, 52 bags per pallet Shipping Point: Trenton NJ, Akron OH, Dalton GA (Contact your sales representative for... Read More
Klean-In-Place II rotary airlock valves are specially designed for applications where frequent cleaning, sanitizing or inspection of the bulk handling system is required and minimum downtime is critical. The Klean-In-Place II has uniquely designed features making it compliant for FDA, USDA, 3A... Read More
Klean-In-Place® rotary airlock valves are specially designed for applications where frequent cleaning, sanitizing or inspection of the bulk handling system is required and minimum downtime is critical. They are also ideal for batch systems where regular cleaning between cycles is required. The... Read More
The KLS series long-stroke blow molding machines are the result of a customer and market driven continuous development of tried and tested long-stroke machines that have proven their reliability and efficiency since 1991. The machines are used for demanding packaging applications such as... Read More
When Manufacturers make the switch to Kluber they notice increased lube intervals, less down-time, and less time applying lubrication. As a result they consistently experience higher production while saving time and money. Read More
KMT Waterjet Systems has launched the Future of Waterjet Technology with the introduction of the KMT Streamline PRO® 100,000 psi/7.000 bar Waterjet Pump. In addition to increasing linear cutting by more than 100%, the Second Generation of the KMT Streamline PRO® Series of Ultra High Pressure... Read More
Very confortable knee pads, developped and produced in Noeth America by injection molding of EVA Foam. Soft, light, confortable, very durable it can be used for gardenning, construction, or anywhere you need to protect your knees Read More
This unique Kneeler design, will bring you confort, softness and durability. Made in Noth America by Foam Creations with the unique XL EXTRALIGHT material, you can use it for gardenning, construction, baby bath...100 % waterproof, it can stay outside without catching water. Read More
US Webcon offers a complete line of knife over roll and knife over air coaters and coating heads to meet your production needs with numerous features and options to fit your specific requirements The above detailed knife over roll coater is designed to perform gap coating on textiles, nonwovens... Read More
Why use Koolmat composite insulation? A silicone/fiberglass blanket that stops 1000°F. radiant heat, lowers sound by 23 decibels, thin, so it fits under OEM carpets, abrasion, mildew resistant, follows all contours, flexible, no asbestos involved in manufacturing process, easy to cut with razor,... Read More
The MINIPRINT KP05 is the most compact pad printer we offer. The standard KP05 is an ideal pad printer for volume production and tagless labeling on textiles. The KP05 has been redesigned with an emphasis on operator accessibility and safety. •With the KP05 fixed cup design, the cliché moves... Read More
If it's versatility you want, check out the KP06, this pad printer can be used as a single color machine, two-color machine and rotational printer, electro-pneumatic controlled via digital programmable microprocessor that produces high quality printing. •Easy to use keypad allows the... Read More
The KP08 is a very versatile pad printer with the option of printing as many as five colors with virtually no drying time. This is the smallest model that allows full-process CMYK printing with a fifth color for a solid background or spot color to be added. •Electro-pneumatic machine is... Read More
Krefine provides a variety of Electro-Static Dissipative (ESD) control materials, Injection molded parts, rods & sheets, and machined parts. The surface resistance is easily controlled at the specific levels required for ESD control materials by the use of Krefine’s special carbon technology.... Read More
Standard industry sizes and ratings up to 60wsi. (interchangeable with CRC, CRB, CRN, CRZ Ceramic E-Mitter heaters) • Designed for use in CRA linear structural housings and easily adapted to any CRA array assemblies • Two mounting styles available; Single point ceramic header with clip(s) in... Read More
Kuredux® PGA is a high-strength biodegradable polyester resin offering excellent gas barrier to carbon dioxide and oxygen, with controllable hydrolysis. In multi-layer PET bottles for carbonated soft drinks and beer it offers gas barrier 100 times greater than PET, reducing the amount of PET by... Read More
Looking for a new vendor?
Choose any category below to get started and compare price quotes for free.