S 5-35 : The Industrial Robot par excellence
S 5-35 is S5 Line's first model on the market to automate IMM from 350 to 800 T.
S 5-35 is :
Quick : powerful servomotors ensure both maximum accelerations and minimum intervention times.
Rigid : the frame structure associated to a new... Read More
To prevent damage to the machine table all clamping frames come complete with a pivoting pressure plate.
Delivery available with any size T-nut.
Delivery includes: Clamping frame, pressure plate and fixing bolts.
Clamping surface finely milled.
Material: Clamping frame constructed from quality... Read More
The 'hook and loop' method replaces tape to fasten cords to low profile carpet. SAFCORD provides the lowest possible profile as it keeps cords in place. Scuffling feet and vacumns will not budge SAFCORD!
Perfect for tradeshow booths, conference rooms and offices.
Hugs carpet on Stairs
3" and... Read More
Monitor Technologies’ SafePoint® rotary paddle point level indicator (switch) with a self-validating design detects material presence plus continuously monitors its own ability to function. This analysis includes sensor health and system power failure, which makes the SafePoint truly... Read More
If you have a pending audit, or recognize that your employee safety and/or training programs are long-overdue for improvement, we can provide you with years of experience and insight to help you design a program to fit your needs. ESS consulting team is dedicated to understanding your unique... Read More
Abbeon Cal Inc. has a wide variety of durable Safety knives and scrapers. These feature a unique retractable blade which allows the blade to retract into the handle after leaving the cutting surface. They are ergonomically designed to work with both left and right handed users and a variety of... Read More
SAFOAM® can be used in blow-molding. Weight reductions of 5-15% have been achieved. Specific grades depend on the resin(s) used. Blow molding is a two-stage process. A hot tube, or parison, is extruded and then molded by inflation within a mold. The general principles for successful extrusion... Read More
SAFOAM®can be used in compounding. At low levels, SAFOAM® powders are ideal for compounding materials. Key benefits include:
Improved bubble stability
Slowed moisture absorption
Improved CO2 solubility rate
Extended shelf life
Excellent dispersion Read More
Foam extrusion is a complex process with many interrelated variables. As a continuous, dynamic process, a change in any one variable has a ripple effect that extends to the final product. Understanding the variables and learning how to control them is the best route to producing a high quality... Read More
SAFOAM®is used in the production of injection molded parts requiring a cellular structure and for the elimination of sink marks and stress in solid parts. SAFOAM® is used in all types of injection molding equipment, including low and high pressure specialized structural foam machines, and... Read More
When foaming to a medium density in rotational molding, it is very important to use proper resins and to achieve the optimum temperature. All blowing agents decompose over a specific temperature range. In rotational molding, the resins must be fully melted and uniformly dispersed before reaching... Read More
Used to remove degradation by-products, increase compatibility of composite fillers & additives and extend product lifetime. Excellent PVC co-stabilizer,; combats FR discoloration in engineering resins. Read More
Line of melt-strength enhancers form an ionic bond to increase viscosity in PE, PP virgin resins.
Chain extenders for PET & Nylon create a physical bond and are ideal for recycled post-consumer and post-industrial regrind. Read More
Slip additive for polyolefins. Functions by migrating to the surface where it exerts a lubricating effect. It provides excellent slip properties in typical molding applications for easy part removal. Read More
One-Piece Straight-Side Frame
Defect of gap frame is eliminated. There's no deflection resulted from stamping. Keep parallelism and verticality of slide movement. lmprove stamping quality and prolong life of die tooling.
Plunger & Dual Quide Posts
Plunger isolates slide from angular... Read More
Polystrand houses the one of the largest lamination machine in the United States. We can make sandwich panels as big as 10 feet wide up to six inches thick and to any length desired by our customers. Because of our continuous and aligned fibers we produce lightweight, high strength, and impact... Read More
The sanitary K Valve is designed to USDA and FDA guidelines eliminating threads, keyways and crevices. The split body design means the K-valve can also be completely disassembled with simple hand tools, allowing quick and easy inspection and cleaning. It is used for charging/discharging or... Read More
National Bulk Equipment, Inc., USDA-accepted bulk bag filling systems are engineered, fabricated, and constructed to USDA-accepted guidelines to simplify integration and start-up of NBE bulk bag filling systems into food processing and packaging operations.
NBE USDA-accepted bulk bag filling... Read More
National Bulk Equipment, inc., bulk bag unloader systems, designed and built specifically for food and pharmaceutical processing and packaging operations, help ensure compliance with domestic and international sanitary standards. Application-specific construction, including 304-2b stainless... Read More
Sanitary tote dumper designed specifically for food processing and pharmaceutical processing applications where compliance with FDA, USDA, 3-A, BISSC, or international standards is required. This NBE sanitary bulk tote dumper also supports process practice protocols where 3-A Accepted Practices... Read More
At HorizonPSI, we support several different industries and understand implementing the proper risk appropriate solution may involve putting safety and sanitary components or solutions to work for you. We believe protecting your employees and facility is just as important as protecting your product. Read More
Our services will help you maximise your success through a combination of our SAP experts, tools and methodologies.
We have a comprehensive portfolio of service offerings. These offerings span all phases of your solution life cycle, from planning to building to running. So you can align your... Read More
Sapphire inks are formulated as both pad printing inks and screen printing inks. Made in Italy under the finest production and quality controls standards, Sapphire series screen and pad printing inks are triple milled to micron level pigment sizes yielding one of the industry's most opaque and... Read More
The Granutech saturn Grizzly M-80 is our original model size reduction system utilizing a state-of-the-art single rotor design. This durable machine is easy to maintain and provides incredibly clean rubber and separated steel when processing tires. The Grizzly's unique rotor construction and... Read More
The Saturn Grizzly Super 80 by Granutech-Saturn Systems is a world class medium speed grinder that provides efficient, high performance size reduction for processing industrial scrap. Granutech’s 40 years of experience designing size reduction equipment means the Saturn Grizzly Super 80 will be... Read More
The latest in shredder technology from Granutech-Saturn Systems
- Electric or hydraulic drive from 20 hp to 400 hp
- Cutter options — size, shape, quantity, material
- Stationary cutter with multiple edges
- Optional bolt-in blade holders
- High torque and high production in the same unit
-... Read More
Our custom S-b-S PET extruded sheet can be cut and formed into a range of packaging products, including thermoform blisters, clamshells, and trays. Profile widths of these polyester films range from 15" to 54". Depending on your specific application requirements, we can manufacture S-b-S PET... Read More
Scanning Frames are a critical factor in making a profile measurement. If the material is not presented to the sensor in an accurate and repeatable way, you will not be able to get the most accurate and repeatable measurement. This is why NDC places emphasis on engineering and producing the most... Read More
The term scientific injection molding (SIM) is becoming a buzzword in the industry. How do you differentiate between true SIM and loosely used terminology? It comes down to data collection, machine performance, processes, material characteristics, and how they influence one another. SIM gives us... Read More
Plastikos partners with our customers to turn around their orders with precision and speed. Our manufacturing system is designed to routinely fulfill orders in one to three days so that we can support our customers’ lean inventory initiatives. We accomplish this service through the use of 27... Read More
Plastic injection molding is a critical manufacturing technique in many industries today. Any method that can be used to reduce cost associated with injection molding parts made from thermoplastic, silicone rubber or standard Buna N rubber and thermo set plastics can utilize the process of... Read More
With twelve courses specifically focused on scientific injection molding, this series is designed to make you an expert technician by giving access to our advanced scientific and technical courses.
12-21 hours of Professional Multimedia Training with Study Guides Read More
Hitech™ cooling water flow manifold components are:
• 3 independent flow channels for Inlet Flange, Cooling Chamber and Exit Lip
• made of corrosion resistant materials
• shipped pre-assembled
• includes j-boxes and cables for inter-wiring by customer with the supplied controls
•... Read More
HIGH-TECHNOLOGY CORP. is the world's leading supplier of filter screens for use with belt-type or ribbon- type continuous screen changers. Filter ribbons are furnished in rolls with a standard length of 120' (36.5 meters) or 60’ (18.3 meters). The yield of such a roll is equivalent to several... Read More
Dual slide system.
Available with 4 positions for some special applications.
We provide back flush screen changers and continuous screen changers depending on the application and customer preference. Read More
Munson Machinery’s SCC-15-B reduces hard, soft and fibrous materials into controlled particle sizes at high rates with minimal fines. It features a proprietary rotor design comprised of cutter heads attached to a helical array of staggered holders called "interconnected parallelograms" that... Read More
Sifting - Classifying:
Materials are usually sifted in line with grinding to control the upper or lower limit of the specified particle size. Sifting or screening to 1/2" down to 200 mesh or 12.5 mm to 75 microns is offered as a standalone service to separate oversize or undersize from powdered... Read More
NBE offers a full line of screw conveyor designs to ensure safe, automated material transfer of dry bulk goods. Whether moving material from offline bulk storage to an inline operation; or conveying dry, free-flowing material from one stage of processing to another, integrating NBE auger... Read More
Screw Plug Immersion Heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Read More
Neue Herbold SB screw shredder / bale breaker is engineered and manufactured with a two fold main function. Its heavy duty design makes it ideal for voluminous materials such as wood pallets, cable drums, sheets of insulation, porous building blocks and when used in the PET bottle size reduction... Read More
Injection system with nozzles screwed directly into the hot runner system.
Having the nozzles screwed directly into the hot runner system ensure that this system avoids any potential problems from plastic material leakage in the event of installation error.
The... Read More
ScrewPlus software provides the accurate prediction on melt volume and temperature distributions with the process-induced effects in the screw and barrel to help users evaluate the screw performance and its optimal design. Read More
United Gear Works has the latest technology and capabilities of rebuilding all types of Screws and Barrels for injection molding, Oil Mills Twin Screws and Barrels, Oil Mill Screw segments and Shafts and Cages also for all processing plants, Band Berry Mixers and rotating equipment.
When we... Read More
GTS (German TwinscrewS) has over 25 years experience in designing and manufacturing different type of Screws for a vast variety of products such as pipe, profile, sheet and pellets. We deliver large single screws and almost any size of twin screws up to diameter of 500 mm.
We guarantee to... Read More
This large dual-hose low pressure, pneumatic blasting system utilizes dry ice block, pellets or nuggets assuring flexibility and versatility in providing a wide range of blasting pressures: 40 to 250 psi (2.8 to 17.2 bar).
The SDI-5 dry ice blasting system includes:
•One length of... Read More
Small and compact makes this level switch perfect for small hoppers on plastic molding and processing machines.
- Range of voltages to choose from
- Local LED indication available
- Range of probe and paddle styles
- Economical Read More
Fishing fans will be familiar with the Seaguar series - another product developed using Kureha's in-house technology. Because it is made using polyvinylidene fluoride resin, Seaguar stands out among existing fishing lines for its strength, sinking speed and invisibility in water. Kureha's broad... Read More
Chesterton's sealing solutions are designed to help plastic manufacturers increase reliability, minimize downtime, and maximize productivity. Our seals have been proven to allow faster, more precise, repeatable cycling for higher production runs and extended service life, while reducing... Read More
Seal-Scan® characterizes seals that appear visually acceptable yet possess defects that affect product quality and shelf-life. Seal-Scan systems utilize non-contact airborne ultrasonic technology for seal integrity testing and seal quality analysis of pouches and flexible packaging. Seal-Scan... Read More
Seal-Sensor™ utilizes ultrasound technology that provides a non-contact pouch seal inspection solution for high speed 100% online applications. Seal-Sensor is a very rapid, reliable method that provides an instant reading of seal presence and quality.
Seal-Sensor™ detects incomplete seals,... Read More
Secura® makes reliable weighing in regulated areas easier than ever, without time-consuming documentation and monitoring tasks.
Besides providing highly accurate weighing results and operating convenience, Secura® also features built-in protection systems for complete reliability and regulatory... Read More
Laser-sintering is well known as the technology of choice for ensuring the quickest route from product idea to market launch.
Selective Laser Sintering (SLS) is an additive process where layers of powder are deposited, solidified and sintered with a computer-driven laser to form a 3D model.... Read More
CHOICE GREASELESS BUSHINGS are designed especially for molders who want to run without the necessity to grease their molds, even intermittently. The one-piece solid construction leads to longer bushing life and provides extra support in a guided ejection system. The self lubricating feature... Read More
Self-dumping Hoppers are designed to work with a forklift and are dumped by simply pulling a handle. Available in four sizes, from our 5/8 cubic yard to our 2.2 cubic yard unit. Molded plastic bodies are available in a variety of colors and are encompassed by an all-welded steel framework.... Read More
When you need precise alignment and durability look to SelfLube Side Locks. Made of S7 steel to resist shock loading, tin coated for hardness and lubricity. Comes equipped with a large internal radii to reduce stress concentration and provide a more gradual lead in. Read More
Do you have any machines that are underperforming or idle? Why not turn them into cash? Meadoworks can help you sell used equipment quickly and easily. A global marketing company, we'll help you get top dollar on your equipment by exposing it to more buyers. You control the pricing, and all you... Read More
Elite Machinery Systems can provide you with a current market value for your used injection molding equipment and discuss the steps we can take to facilitate the sale or upgrade of your machines.
We currently have over 100 requests for used plastic injection molding machines. Read More
When the leading manufacturer of Automated Test Equipment (ATE) was searching for a custom molded solution, they turned to Ray Products to provide highly cosmetic and functional pressure formed parts to meet their needs. Integrating our custom molded plastic parts with a sheet metal... Read More
Palram polycarbonate and PVC sheet materials are second to none. Whatever your project, we have a material to fit you needs. Palram's extensive product line has earned the respect of Pro Builders, Architects, Specifiers and Contractors for its unique blend of Strength, Durability, and Good... Read More
Bathware/sani-ware applications, multi-layer composite sheet made of ABS co-extruded with high gloss, high chemcial and stress-cracking (ESCR) resistant, PMMA (acrylic) top layer. Products suitiable for shallow, medium and deep draw appliation. . . .Ask about CSA Approval. . . .antimicrobial... Read More
Bathware/sani-ware applications, multi-layer composite sheet made of ABS co-extruded with a improved high gloss, high chemical and stress-cracking (ESCR) resistant, PMMA (acrylic) top layer. Suitable for shallow, medium and deep raw applications. . . ask about CSA approval. . . .antimicrobial... Read More
Multi-layer compsite with a carrier layer made of high impact ABS co-extruded with a top layer made of matte TPU. The backside of the sheet is produced with an EASYGLIDE layer, for more uniform wall thickness in the thermoforming process. . .interior and exterior products available. . . .key... Read More
Multi-layer composite sheet made of HI (high impact) ABS
Co-extruded with a top layer of high gloss, chemical and UV resistant HI & MedI-PMMA (acrylic).
Available in solid and Metallic colors custom matched for your application-company colors.
Produced with an EASYGLIDE backside layer for... Read More
Multi-layer composite sheet made of high impact, high heat resistant PC/ABS blend. Co-extruded with high impact and UV resistant PMMA (acrylic, produced with an EASYGLIDE backside for more uniform wall thicknesses in the thermoforming process.
Available in solid and metallic colors matched to... Read More
Frankl & Thomas has been successfully serving the needs of synthetic fiber producers around the world for decades. Our wide range of separator rolls are primarily used for the drawing process, which includes draw twisting, draw texturing and draw winding. Read More
The major application for the Seprene family of products is for the construction industry (industrial boots, etc.) and for the automobile industry. They are also used to replace santoprene, sarlink, tekbond and synprene.
The elastomeric base is a hydrogenated isoprene. This compound is... Read More
Not just any Picker ... A Sepro Picker!
• Easy adjustment of strokes, take out direction and swing angle.
• Safety lock on vertical arm to prevent arm movement during loss of air pressure.
• Sprue Gripper with runner verification as standard.
A simple, open and safe electronic control
•... Read More
We understand that in some circumstances a side entry solution is either not practical or not justifiable. To allow us to provide alternatives for these occasions we are pleased and privileged to be an approved integrator for Sepro robotics. The flexibility of the product range offered by... Read More
Before a product gets its serial readiness, it has to pass different tests. To make sure that the raw part meets our strict requirements for drum coating technology; all materials are tested and approved on site by our specialists. Read More
In-line PET preform Stretch-Blow Moulding "two steps" machine (SBM), single cavity.
The NEW "all electric" MIPET series machinery assures the best accuracy in the movements, optimizing all the issues involved during the production. It is the fit machinery for who look for high productive... Read More
The MP series, with single and double work stations, is made up of 7 models. The range covers productive requirements for containers with a volume capacity starting from 5 ml up to maximum of 5 litres.
The MP series is distinguished by its consolidated oleodynamic technology (relative to the... Read More
The Torino series has been designed to match all the specific needs in the injection molding process, including packaging, electronics, automotive, medical, and more. Capable of processing materials such as ABS, PC, PET, POOM, and others.
The hybrid system (servo-drive) allows high response for... Read More
The Series 819 EZ, a two stage bolt system with the FeatherTouch™, eases adjustment and enables superior sealing capabilities. With Series 819 EZ system, removal of the die holder is quick, and total cleaning of the body and the diverters is assured. After the thorough cleaning, reassembly is... Read More
The new CV 500 Series offers the modular design of the 800 medical series as well as the successful polymer/rubber heads for the highest accruing, improved temperature control, decreased material volume for ultra-precision, plus easier and faster adjustment and cleaning processes of the... Read More
Small Production Runs
During the design of this type of mould, all the information and conclusions obtained from the R & D stage are priority, as are results from ant prototype mould which has been constructed.
Design and production of the mould using the most suitable types of steel,... Read More
With the D3 descaling unit for water systems, descaling agent REM 93, corrosion inhibitor RK 93 and system cleaner SR 80 for oil circuits, Regloplas offer their customers optimal assistance for maintenance.
Systematic Regloplas methods also in service: Descaling of water and steam systems as... Read More
Servobottle for Screen Printing on plastic bottles
Servobottle: extremely compact up to 8-colors fully servodriven machine for printing on multi-format plastic and glass bottles.
Stand alone or hooked-up to complete packaging line
top quality printing on... Read More
The Sevrene line of SEBS (Styrene-Ethylene-Butadiene-Styrene) based TPEs combine broad temperature capabilities with excellent weathering properties.
These are key requirements for automotive interior applications, sealing systems, and soft touch industrial and consumer components.
These TPE... Read More
The Sevrite line of SBS (Styrene-Butadiene-Styrene) based TPEs provide the same broad temperature capabilities as the Sevrene TPE line, but in a more cost effective product where strong exterior weathering properties are not required. Read More
The SF-400 Partition Inserter family are available in models to match any manufacturing speed requirements. From low speed to high-volume production, these partition inserters are designed to run reliably and consistently even in 24/7 work environments. Handles corrugated or solid fiber... Read More
Shaped-beverage pouches are the latest creative packaging solution for the food and beverage industry. Polymer Packaging, Inc. is leading the development of shaped-beverage pouch solutions for everything from alcoholic cocktails to fruit drinks, and our customers are reaping the benefits.... Read More
LAST-A-FOAM® is available in a variety of densities-from 5-50lb, standard and custom sheet sizes. Our specialist will match foam properties to consumer needs based on specifications and costs. Read More
Now Plastics provides a wide variety of standard and customized designer sleeves, sheets and roll film to enhance the appearance of your bouquets. Choose from an assortment of sleeve sizes and styles including; Clear, K printed, straight-edged, scallop-edged, sealed bottom or a hybrid. Read More
Kostklip® ShelfTalkers™ are colorful, reusable shelf edge signs for promoting specials, your brand, private label, health messages and more! Our shelf talkers are screen printed at the highest quality on PVC plastic.
Standard ShelfTalkers™ are designed to fit either ClearVision® or ClearGrip™... Read More
With growing retail market, the demand for a recyclable shopping bags is increasing. These bags with high quality printing gives a boost to your brand image.
We can provide, shopping bags with matt finish and gloss finish BOPP. We can also design shopping bags for you. Read More
The spring actuated machine needle shut-off nozzles type SHP are used in processing of thermoplastics, principally with low viscosity materials such as: PA, PPS, PE, POM, PP.
Finds application in: Packaging, automobile and leisure industries, medicinal and electronic equipment.
Operation:... Read More
EUROHANSA,Inc. offers ZENO Shredders and Recycling Equipment for the Plastic and Wood Industry since 1988 in the US and Canada. Based in High Point NC in a 12.000 sq.ft building, machines and spareparts are in stock. Material testing units are abailable for application evaluations and machinery... Read More
Recycling equipment from Costarelli USA, Inc. includes the company's shredder machinery for reducing the size of incoming material. The shredder can process the widest range of products with high productivity per hour and limited maintenance. Read More
With a wide variety of sizes and styles of shredder inserts available in stock, AMERICAN CUTTING EDGE stocks replacements compatible with the most common shredders on the market to some of the more difficult to find brands. Read More
AMERICAN CUTTING EDGE offers a comprehensive stock of rotating shredder tips to match your application and help you maximize your shredders throughput so you can get more production from your shredders for a longer period of time and decrease downtime due to maintenance.
All of our rotating... Read More
Shrink Film is one of Grafix Plastics many specialty film products. This cool shirinkable plastic sheeting is the same film, that was very popular in kids crafts in the 1970's and is all the rage now. Just draw, cut and bake, that's all you'll have to do with Grafix Shrink Films for a really fun... Read More
IPG began producing polyolefin shrink film in 1993. Over the past 20 years, we have been shrink wrapping products throughout the world with films produced at our manufacturing sites in the US and Portugal. ExlfilmPlus® and Exlfilm® are among the leading lines of premium shrink film in the... Read More
We feature world-class high speed and intermittent motion shrink-wrapping equipment from Shrink Tech Systems. In addition, we carry a variety of in-feed conveyors, custom conveyors and other specialty material handling packaging machinery.
The final result of the combined conditions created from filling, packing and cooling.
- Identify Exact Shrink in X,Y,Z
- Shrink Due to Cooling Only
- Shrink Due to Gate Location, Part Design & Processing Only
- Exact Mold Shrinkage Design
- Reduce Stress Concentration
- Identify... Read More
Hull's Shuttle Presses are high production rate presses for parts requiring operators to load intricate inserts into the mold. Hull Industries has built hundreds of transfer molding shuttle presses from 50 tons up to 400 tons.
Shuttle press can:
-Increase production and... Read More
MODERN Machinery’s Cut Sheet Single Station Thermoforming Machines are excellent for manufacturing large or small parts at a modest cost. Known for their flexibility and versatility, these machines are ideal for many thermoforming applications. MODERN’s machines can be economically... Read More
The Graham SBG 700 dual sided shuttle, available with 2 to 8 parisons and with two to six layers for coextrusion, offers robust construction with 27 US tons and is designed for a large range of flexibility in container size. Highlights of the GEC shuttle include a quick mold change system and... Read More
Deco Tech is the North American distributor for SicaTech brand of corona treating discharge units used for the pretreatment of plastics. We provide sales and service for their full line of standard corona treating units and we also build custom automation using their equipment to pre-treat 3D... Read More
Reduce production costs and maintenance with our SIDE ENTRY robot.
IML Robotics, through extensive experience in projects for over 5 continents offers fully customized IML solutions capables to improve productivity, cut costs and ensure full performance with a highly efficient technical team... Read More
This high speed, side entry, beam robot has full servo control and is produced to a tried and tested design. With over 20 years of continuous production on many of our units the reliability and dependabiity of the unit makes it a market leader. Read More
SIGMA’s SIGMASOFT® is a process simulation software solution for polymer injection processes that simulates the elastomer injection process (i.e. for LSR’s, a material category not covered by traditional design simulation tools).
SIGMASOFT® is considered by some as “the next generation of... Read More
SIGMASOFT® is the market leader in the simulation of elastomeric materials. Beyond the simulation of filling and curing, it is the only software in the market able to effortlessly integrate the complete mold information within the simulation, so that the impact of tempering concepts, processing... Read More
The thermoplastics injection simulation capabilities of the SIGMASOFT® software include: Steady state mold temperature; Hot-runner functionality; Cascade injection; PI-controller; Mold filling; Multi component simulation; Packing and cooling; Shear imbalances; Fiber orientation; Ejection; and,... Read More
The thermoset injection simulation capabilities of the SIGMASOFT® software include: steady state mold temperature; heater controlled by PI-controller; cold-runner functionality; mold filling; curing reaction/cross-linking; and, fiber orientation.
Simulation is establishing itself as one of the most innovative technologies in Powder Injection Molding, as it has proved to drastically reduce the development time for new parts and the costs associated with iterations in the production of new molds. With unique features developed specifically... Read More
As the only software package available in the market to effortlessly integrate the complete mold information within the simulation, SIGMASOFT® delivers an unmatched degree of accuracy in the molding behavior prediction of thermoplastic materials. Beginning with a simple part design followed by... Read More
SIGMASOFT® is the most complete and accurate simulation software package currently available to simulate the processing of thermosets, both for injection and mold-transfer processes. Beyond the prediction of filling and curing behavior, its highly sophisticated 3D solver technology allows to... Read More
Technically, the roots of SIGMASOFT® go back to a MAGMA R&D project in the mid-1990s, which was focused on a new coupled heat flow / fluid flow solver for non-Newtonian flow of semi-solid aluminum. Today, after 20 years of ongoing development, the SIGMASOFT® Thixo module allows the prediction of... Read More
Airmate has pioneered plastic signage and has a patent pending on outdoor, fade resistant UV treated safety signs. These signs resist vandalism and colors stay brighter much longer than conventional signage. We also make face plates for vending machines, and machinery that can be decorated to... Read More
With the Silicone Ink you can print on any items made of silicone rubber including iPad and iPhone covers, custom silicone wristbands, oven mitts, swimming caps, flexible computer keyboards, remote controls and any number of other popular promotional items made of silicone.
The Silicone Ink is... Read More
For your toughest applications, where you need the most effective release to keep parts from sticking, try our heavy-duty release. It’ll keep your production flowing.
• No chlorinated solvents
• Approved for indirect food contact(++)
• Faster molding & more production
• Approved for food... Read More
Tempco's Flexible Heaters made with Silicone Rubber or Kapton insulation are capable of operating with excellent performance under many adverse conditions, including: moisture, outdoor exposure, or ambient temperatures, radiation, ozone, compression set, vacuum, fungus, oils, solvents, and many... Read More
Rama products are the strongest and most versatile industrial heaters on the market. We design and manufacture Rama® Flex heaters to provide moderate heat and even distribution on both irregular and smooth surfaces. The Rama® Flex heater is designed for use with industrial equipment in limited... Read More
Kapton and silicone rubber heaters are extremely versatile and operate efficiently in many environments. Kapton® flexible heaters offer superior tensile strength and tear resistance, with precision heat distribution. They are ideal for extreme temperature environments, from -319°F to +392°F... Read More
M.R. Mold & Engineering offers silicone vacuum seals in two sizes for parting line sealing of silicone and rubber molds. This seal has the following unique features:
Silicone formulated for the high temperatures required on silicone and rubber molds for longer life.
Designed with a... Read More
Monitor Technologies’ SiloPatrol® SE smart cable-based level sensors are effectively utilized to improve inventory control of powder and bulk solids. The sensors measure the inventory level automatically and on-demand without the need for your operator or plant personnel to climb silos, which... Read More
For Direct Kinematic Viscosity of Transparent & Opague Liquids with Near ASTM D445 Precision
Product chain of custody monitoring
Point of use testing
Industrial lube blending
Packaging & distribution of petroleum products
Petroleum... Read More
In the blow mold design process, Creative Blow Mold Tooling design engineers use Computational Fluid Dynamics (CFD) analysis to enable quick, efficient simulation of fluid flow and heat transfer. Our design engineers can easily calculate fluid forces and understand the impact of a liquid on... Read More
COMPUPLAST® provides training the best-in-class simulation and CAD software products to the plastics and rubber industry. The training can conducted on-site, off-site, or online. Our processing experts will teach you, not only, how to use the software, but also, how to apply it to optimize your... Read More
Boston Matthews has designed and manufactured extruders for more than 50 years.
Single Screw Extruders: 3/4" - 6"
Jockey Extruder : 1/2" - 1 3/4"
High Temperature Extruders : 1" - 3"
Advanced screw design capable of processing a wide range of polymers including:
HDPE - MDPE -... Read More
R & B offers the MAX Extruder, a complete line of single-screw extruder machines ranging in size from 1" to 10" in diameter. The MAX Extruder can be utilized as a stand-alone extrusion machine or as part of a complete extrusion-system incorporating HMI controls and components by R & B. Read More
Neue Herbold - Single-Shaft-Shredders HZR Series are mainly used for pre-cutting of bales, scrap tires, energetic utilization of waste as well as post consumer waste.
- automatic reverse operation
- exchangeable knife supports
- exchangeable cutting heads
(bolted/plug-in... Read More
Our Sink Float Tank is used to separate different materials based on their different specific weights. This is accomplished by feeding mixed materials into the tank, which is filled water. There are paddle rollers for pressing the materials down into water, mixing the materials fully with water... Read More
CMS North America's Sintesy CNC machining center is designed to cover 100% of your cutting and machining applications for thermoformed plastics and other materials. It offers dynamic, high-speed, 5-axis performance and the longest working strokes on the market. The Sinetsy system provides safe,... Read More
The Sintex system is CMS North America’s smallest and most versatile cutting machine. Our first compact CNC machining center provides high-speed processing of thermoformed plastics, composite materials, and more. Sintex allows for very high productivity by means of its efficient pendular design.... Read More
Our granulator product lines cover a full range of sizes and applications. We start from the slow speed, beside-the-press models of the A Series and the compact soundproofed granulators of the C Series. These machines are commonly used in injection, blow-molding, and extrusion applications. The... Read More
Sterling provides a wide range of size reduction equipment and systems utilized in injection molding, thermoforming, extrusion and recycling facilities. Products include beside-the-press, below-the-press, central and heavy-duty granulators along with single or multi-stage shredders. A variety... Read More
AEC provides a wide range of size reduction equipment and systems utilized in injection molding, thermoforming, extrusion and recycling facilities. Products include beside-the-press, below-the-press, central and heavy-duty granulators along with single or multi-stage shredders. A variety of... Read More
The Econo-Skin is a bench-top skin packer designed for low to medium production, where space and size are a consideration. It incorporates an energy saving heating system with instant on/off heaters. The Econo Skin is a complete self-contained machine, requiring connection to electrical supply... Read More
Big Pak Sleeve Packs
Featuring high-density polyethylene (HDPE) construction. Lightweight for better ergonomics. Low profile minimizes storage space and reduces shipping costs.
ISPM 15 exempt.
Mirror Image pallet and lid are interchangeable.
Conveyable model with lid.
Sleeves:... Read More
Wide slide nipper for you can choose. Slide nipper for cutting gate diameter from 1.0mm to 6.0mm by standard and offset nipper blade. Especially for automation process adopting and matching with nipper mounting bracket and tube or x-profile frame. Read More
Mold cleaners are a convenient and effective way to remove release agents, grease, oil, wax and resin build up. These products increase molding productivity by keeping mold surfaces in new condition. A combination of these products is a must for all molding and tooling applications. Read More
Midwest Knife Grinding, Inc. offers precision ground, wear resistant knives available from stock. Converting, printing, packaging and so many more industries can benefit from our quality products.
Bottom Shear Slitters
Top Shear Slitters
Dished... Read More
Wilmington’s new Small Bottle Rotary Blow Molding System is ideally suited for all single serve, high volume applications in the dairy, juice, foods and liquid yogurt markets. Bottle size from 80 to 1000 ml in mono or multilayer applications. Reduces bottle weight, energy savings, labor savings... Read More
We can help reduce your annual Small Package Shipping (less than 150 lbs.) & Courier Services spend by thoroughly reviewing, auditing, analyzing and optimizing these services with your existing vendors/services. We find where they have been overcharging your business! It would be our PRIVILEGE... Read More
Laboratory Processing – Lab Grinding, Pulverizing, Sifting:
Small samples for R&D purposes or small orders of material can be Granulated, Pulverized, Sifted or Screened with or without cryogenics as needed to most any particle size required. Read More
SmartBob is a proven, highly reliable and accurate inventory management system for monitoring powders and bulks solids for one or an entire network of bins, tanks and silos. The weight and cable-based rugged SmartBob2 sensor is for bins up to 180’ tall, while the SmartBob-TS1 is for bins up to... Read More
Smartflow® flowmeters effectively and accurately measure flow rate. Available with with a number of options including thermometers, pressure gauges, liquid-filled pressure gauges and quick change socket and plug. Electronic flowmeters featuring FCI (Flow Characteristic Indicator), flow rate auto... Read More
Teflon PTFE Tubing ( Polytertafluoroethylene ) is the first and most common of the Fluoropolymer products. PTFE Tubing has the widest range of applications thanks to its high service temperature, superior chemical resistance and insulating properties. With a clean smoothbore interior PTFE... Read More
Since 1991, MB Conveyors has produced a very efficient system to eliminate damage caused to PET preforms during storage inside the container.
Operating principle of the Soft Drop: the moulding cycle is received from the IMM and conveyed by means of a CPT conveyor to the PA conveyor/distributor... Read More
SOFTAL designs and manufactures innovative and powerful corona and plasma surface treatment for paper, plastic, metal and textile surfaces, even plastic boards and foam. Fifty years of surface treating experience have made SOFTAL one of the key players in this industry.... Read More
SoftGate® valve pin velocity control technology resolves process challenges related to conventional hydraulic sequential molding. Poor flow characteristics leading to part inconsistency, flow hesitation lines, or blemish marks are reduced with SoftGate®. The gradual pin actuation, precisely... Read More
Gain actionable insight into manufacturing improvement opportunities for your plant or entire enterprise
Accelerate operational performance initiatives such as Lean, Six Sigma, TPM, and other continuous improvement methods, drive operating strategies, and capture actionable insight into... Read More
Answer your toughest manufacturing & processing questions with Mattec real-time manufacturing execution system.
Gain access to real-time manufacturing information. Improve plant productivity and eliminate machine downtime. Increase productivity, unlock capacity and reduce inventory and labor... Read More
Solarsoft's flagship ERP software for discrete manufacturing, iVP is designed for intensive supply chains. iVP helps eliminate shipping errors, tighten inventory accuracy, and strengthen enterprise-wide control and supplier management.
Solarsoft iVP is designed for single-plant to... Read More
Founded in 1964, Penn Color was one of the pioneering producers of Masterbatches and Color Concentrates for plastics. We currently operate 4 global Masterbatch and Color Concentrate operations in the US and Europe, and produce high quality, custom formulated color and additive products in... Read More
Plastics Color Corporation’s SoluPET™ line of colors for Polyethylene Terephthalate (PET) was developed to provide ready-made and custom solutions for pharmaceutical, nutraceutical, fiber industry, and food contact products. If your application requires, our colors comply with the U.S. Food and... Read More
Plastics Color Corporation creates environmentally sound solutions for colorants, resins, and additives. With this in mind we have introduced product lines that include: color concentrates made with post-industrial regrind and industrial plastic content, eco-friendly colorant and additive... Read More
Plastic Navigation Industrial Ltd started as a plastic tooling & molding and brush-inserting factory for 20 years.
As business is expanding, from 2008, our company start developing electric toothbrushes as we have also the facilities for
manufacturing them. We also offer OEM and ODM services... Read More
A value-added service Falcon provides to customers, sonic welding takes high frequency, low amplitude vibration to create heat between two materials, joining them with maximum weld strength. With no connective bolts, nails, soldering materials, or adhesives required, this process proves cost... Read More
Sonics' 15 kHz ultrasonic welding equipment is designed for welding medium to large-size parts at higher amplitudes and lower frequency. Plastics assembly at the 15 kHz frequency permits the welding of many softer plastics with greater far field distances than is possible with conventional 20... Read More
Sonics' 40 kHz ultrasonic welding system enables welding of delicate, small, close-tolerance assemblies where applied pressure and ultrasonic vibrations need to be minimized. These fast, precise and virtually inaudible models are ideally suited for plastics assembly with products such as printed... Read More
Weld by digital time and/or energy with Sonics’ 500 watt ultrasonic hand held welding systems for manual assembly operations, such as spot welding, staking and inserting. Available in 20 and 40 kHz frequencies, these lightweight hand guns feature autotuning, programmable time, energy or... Read More
The patented SorbaView® SHIELD is a one-step catheter securement system that combines the features and benefits of a SorbaView® Dressing with SHIELD Technology.
Combined together, the SHIELD offers all the features and benefits that have made SorbaView the leader in catheter dressings, with the... Read More
In the early days waste streams ran over grading belts and only the most desirable items were hand-picked by a rather large number of crew. From those early days of hand-sorting, to the high-tech and almost fully automatic systems available from ZENO GmbH noticeably dramatic improvements - both... Read More
Is your machinery too loud? Put the Wrap on noise pollution. Custom manufactured lightweight flexible panels can be hung on, or mounted to, numerous types of support frames, controlling noise problems in compliance with OSHA requirements. Various designs such as stationary panels, sliding and... Read More
Pure high molecular weight high density polyethylene (HMWPE) homopolymer polymer in finely sized rounded powder form. Avg. = 75 micron, D100 = 130 micron. Melt index significantly less <0.1 gm/cc/10 min Read More
Specialized glass beads specifically designed for controlling bond line thickness in adhesive bonding.
These beads are manufactured and certified to meet the specification requirements of Raytheon HMS20-1776 and Boeing SCGMS-53004. Read More
APPLICATIONS: Medium volume container production, custom molding, quick change applications, short run or long run processing.
OUTPUT: 15" or 18" wide clamp options, 57mm (2.25") extruder, over 1 pound (500 gram) shot capacity.
CONFIGURATIONS: SPB-3 systems are designed in a modular... Read More
Our COM Add-in to MS Excel leverages the power of the world's most popular spreadsheet program with Quality America's 35+ years of SPC software development. Accessed via an MS Excel task bar icon, the SPC software for Excel charting wizard effortlessly constructs appealing charts with a rich set... Read More
We developed the first SPC software for MS-DOS (1983) and MS Windows (1991). Our longevity in developing innovative SPC software is a testament to our dedication to working with our customers to improve their operational efficiency. This SPC Software streamlines your process data management &... Read More
The special actuator SV35-40 is suitable for cutting and sealing operations of textiles and fabrics with a minimum of 50% synthetic fibre content.
. Designed for integration into cutting rails as well as on weaving machines
. Air cooling optionally retrofit
. Ideal for continuous... Read More
From its inception Integrated Design Systems has consistently broadened its client base with a diverse range of companies in virtually every market sector. This business philosophy has enhanced our design insight and creativity by contributing vast amounts of invaluable information to a... Read More
Chroma Color Corporation Special Options
Our industry depends on uncompromising color consistency. We have the experience and equipment to make sure your color needs meets your exact specifications. Read More
Color Master has many years experience providing special effect colorants. Our palette of special effect products includes Metallic, Pearlescent, and Granite Effect colorants.
We also produce master batches for fluorescents, phosphorescents, and optical brightners. We can provide thermo... Read More
Highly loaded products allowing lower usage and more cost effective total coloring cost.
IR pigment systems providing lower heat absorption in outdoor applications enabling wider color selections for outdoor products.
Anti-microbial additives formulated into the color.
Specific challenges require an individual configuration and well thought-out technology. SINGLE specializes in the development, adaptation and equipment of special solutions. From suspended temperature control systems, water temperature alternating systems through to special... Read More
For very special materials, new machine technologies, Holz is able to render an individual product with characteristics of the Composite and Universal Twist Caps intensified, reduced, or modified in a completely new Twist Cap Model. Read More
Toys, coolers, garden tables, road barriers, floating piers, household appliance components and many others: the specialties sector encompasses a wide range of goods manufactured by extrusion-blow moulding that go from light to heavy items, from just a few centimetres to metres long.
In such a... Read More
At Plastics Color Corporation, we offer a diverse lineup of specialty additive masterbatches. These specialty additive masterbatches enhance the performance properties of plastic. This comes in handy when you need a safer flame resistant plastic, such as our FlamaSol FR™. Or maybe you need the... Read More
Burgess Colours develop colour masterbatches to suit your needs. With years of experiance and extensive knowledge we can produce the colour masterbatch that fits your process and application. Colours are formulated in both polymer specific and universal carrier systems Read More
Watlow specialty heaters are designed for thermal applications where high performance is required, and fast response and uniformity are essential.
Specialty heaters from Watlow have design flexibility to meet different applications requiring different construction methods. This flexibility... Read More
No matter what need you are trying to fill, Chem-Pak has the solution. From spot lubrication to machine tool fluids, silicone to moly, and rust preventives to penetrants, we have the products that meet your needs. Chem-Pak has supplied industrial maintenance products to companies for over thirty... Read More
ResTech Plastic Molding uses multi-component insert molding products in both plastic on plastic and plastic on metal. The insert molding process offers the ability to manufacture these products without the extraordinary tooling costs often associated with 'two-shot' molding. Our three (3)... Read More
Poly Pak offers food packaging plastic and poly packaging films designed specifically for the food industry. Our poly packaging and packaging films are form fill seal film for sugar, ice & more. Read More
Tables with a small volume, on legs, with cap, double plates
Heating by thermal conduction or by infrared
Possibility to be divided in several independant zones allowing the combination of different treatment steps
Heating by hot air... Read More
High quality “class A” surfaces are expected to have a clear and brilliant appearance. Micro structures can cause a milky appearance. This effect is described as milkiness or haze and is often caused by specific parameters in the production process like resin type, degree of dispersion or... Read More
Speed of Service, Industry Leading Materials, Advanced Designs
Chesterton® is a leader in the polymer seal industry. The SpeedSeal® Program brings same day service of this advanced technology to customers worldwide. Strategically located and integrated service centers use innovative... Read More
The Spencer Impact Attachment was developed for use with Thwing-Albert's Elmendorf Tear Tester. It provides a convenient method for determining the impact resistance of plastic films and packaging materials under conditions that closely approximate the strain rates that the material is subject... Read More
SPHERO® is an underwater pelletizing system designed for all kinds of thermoplastic materials, characterized by high flexibility and a small footprint. The system produces spherical pellets of superb quality, ideally suited for further processing with throughputs up to 36,000 kg/h.
Keep your machines in perfect working order with the Spin Cleaner SC1. This fluff collector removes fiber build-up, helping to ensure your yarn stays a constant quality. This product is built to withstand daily wear and tear. All parts are easily serviced and spare parts are available. Read More
Spin Welding is the preferred technique for thermoplastic parts with a circular axis joint which have high bond strength/hermeticity requirements. During spin welding, one part is held stationary in a holding fixture while second part is rotated against it under pressure at speeds up to 16,000... Read More
Two standard models of servo controlled spin welders are available. The first model has servo control of the rotational axis with the ability to program the final orientation position with +/- 0.1 degrees, and a pneumatically operated Z-axis. The second model, includes servo control of the... Read More
ADESCOR has several standard models of Spin Welders to accommodate your spin welding requirements from 50 mm to 1000 mm pipe (inside diameter). ADESCOR has proven technology to weld couplers to the end of the pipes or to the outside diameter of the pipes. Our spin welders are designed to... Read More
All thermoplastic materials can be spin welded. In general, plastic materials that are suitable for ultrasonic welding can also be spin welded. Additionally, spinwelding is excelent for many dissimilar material applications and overcomes welding materials with poor ultrasonic transmission... Read More
LDWR - Spooled High Temperature Lead wire:
All of Tempco’s High Temperature Lead Wires are designed for:
• Internal wiring for commercial and industrial heating products
• Heat treating furnaces and kilns
• Commercial food service equipment
LDWR - Teflon® / PTFE Spooled Lead... Read More
Chesterton offers the latest version of spring energized polymeric seals. Spring energized seals typically consist of a polymer jacket and a metallic spring. The spring provides a consistent load throughout the circumference of the seal and creates a leak-tight seal between the jacket and the... Read More
Sprinter Marking offers a wide range of industrial marking ink types to suit a range of customer requirements. Some of the more common types and colors are described on our website. Quick drying pigmented inks are available in a range of colors. Read More
Closure systems engineered for speed.
Hot tip and valve gate solution specifically engineered for applications running 3 to 6 second cycles. Exceptional color changes, industry fastest guaranteed. Industry leader with superior fill balance on high cavity tools.
Spunbond pouches are the perfect packaging for class A surface protection. Our spunbond polypropylene pouches and spunbond polypropylene sheets are customized to your needs or ordered from our customary products.Our spunbond polypropylene pouches and spunbond polypropylene sheets are converted... Read More
Nippon Nozzle produced the first commercial Spunlace Jet Strips in the early 1970s and since then they continue to keep their position as the world leader in Water Jet Strips for Spunlace.
Unique technology and custom manufacturing capabilities allow Nippon Nozzle to manufacture Spunlace Jet... Read More
Separator with rotary drum consisting of 24 PVC rollers having 50 mm diameter and 800 mm length (the distance between the rollers can be adjusted manually).
Each separator has its own Inverter for regulating the drum rotation speed; Possible adjustment range: minimum 4 rotations/minute, maximum... Read More
Rotary paddle bin level indicator:
- 20-250VAC/VDC universal power supply
- Local LED indication
- Relay output
- Adjustable time delay
- Fail-safe on power failure
- Quick shipment Read More
The SRZ is a DIN rail mounted high-density modular system with a sample cycle time of 250ms and a 0.2% accuracy. Control method is selectable between position proportional control and cascade control in addition to heat only and heat/cool methods. A quick rise/drop to setpoint gives greater... Read More
Winpak's S-Series cups are round thermoformed containers with flat lips. S-Series cups are used primarily for margarine, butter, and spreads applications, and are designed to be run on high-speed fill/seal packaging machines.
The ZSS uses a non-dispersive infrared absorbance system which is made up by an infrared semiconductor laser for a light source and a photo-diode for the photo-detection. Measure NH3, HCl, H2O, O2, CO, CO2, and CH4 gas concentrations in a stack at high speed.
The ZSS has a measuring range of... Read More
The Irwin Research "STACK PACKER" is a free standing, continuous motion system designed to bag thermo-formed products in conjunction with a vertical trim press of other means.
The "STACK PACKER" provides high speed packing with the controlled motion of a servo driven rotary mechanism to... Read More
Medium Duty - Most popular series. General duty transfer hose for moderate handling, and for dry bulk materials that are mildly abrasive.
Heavy Duty - Transfer hose for moderate to heavy handling with additional resistance to internal abrasion. Read More
304 Stainless Steel Cooling Water Manifolds are made in the USA for superior quality and are available in many sizes and configurations.
Stainless steel has superior material qualities such as: corrosion resistance and chemical compatibility. These manifolds are extremely durable. They will... Read More
Automatic machine most suitable for multi-layer PE-AL-PE pipes. It performs the preset number of cuts or it is synchronized with another machine as the coiler, the extruder or the pipe printer. The machine is PLC-driven using dedicated software. Read More
As a leading supplier of stand-up, shaped, spouted, and retort packaging and pouches for the food and beverage industry, Polymer Packaging, Inc. invites you to explore all of the pouch options that continue to gain popularity in the United States.
Let our experts develop your company’s next... Read More
Zeus offers an arsenal of fibers designed to perform in diverse and demanding applications. Properties such as high tensile strength, optical clarity and extreme chemical and temperature resistance define Zeus fibers. These lightweight monofilaments also have superior friction and wear... Read More
Since many years cavity pressure is the basis for optimizing, monitoring and control of the injection
molding process. Instead of using the direct quality characteristics such as the part weight and the
part dimensions the quality of the molded part can be determined even during production by... Read More
Oxford standard compounds are a fully developed range of pre-colored and reinforced grades of popular resins that we market as direct replacements to brand name products, while offering lower pricing and faster leads times. Our Standard compounds encompass formulations with most base resins... Read More
Thermoplay has over 30 years experience in developing technology for the Mold & Die Industry. Thermoplay has its round-the-clock automated production lines that can shorten manufacturing times enabling the normal systems to be completed within 3-4 weeks while only 2 weeks for standard 2,4,6 and... Read More
This multi-purpose gusseted tube liner is our most cost effective liner. Our standard tube liner is compatible with most container types and is available in almost any size. Available with a sealed or open bottom, depending on desired discharge method. Read More
Savillex molded PFA tubes are widely used in the preparation and storage of a variety of samples for trace metals analysis and other applications. Savillex PFA tubes have a wide service temperature, are unbreakable, and available in a variety of designs and sizes to fit a wide range of... Read More
Stanyl® is our high-performance polyamide 46 used for applications in automotive, E&E, gears and outdoor power equipments.
Stanyl is a high performance polyamide that provides unmatched performance and value for demanding applications in which superior heat resistance, design stiffness, wear &... Read More
StarBond TPE alloys are perfect choice for TPE overmolding applications. Some of the StarBond product family qualities:
•Excellent adhesion to wide range of commodity and engineering plastics
•Ultrasoft grades Read More
StarClear TPE alloys is ultraclear class of TPE material. Soft and ultra clear TPEs specifically targetted to medical, consumer and sporting goods market. The StarClear product family qualities:
•Overmolding TPEs with excellent adhesion to a wide range of engineering plastics
•Ultraclear... Read More
StarFlex TPE Compounds are materials developed to fulfill a broad spectrum of customer specifications. They are designed to provide an economical solution for a wide variety of applications while providing these advantages:
•Soft, flexible feel
•Excellent grip characteristics
•Good... Read More
StarGrip-X TPE alloys particular class of TPE material with excellent griip properties. This unique characteristic combined with wide range of hardness results in highly customizable solutions for your TPE needs. The StarGRIP product family gives:
•Rough... Read More
Starlinger recycling technology delivers innovative machinery solutions for the efficient recycling of a wide range of plastics. The recoSTAR recycling lines produce high-quality pellets from input materials such as films, PET flakes, fibers, PP raffia as well as non-woven materials. This... Read More
Starlinger’s recycling line recoSTAR PET iV+ incorporates state-of-the-art Solid State Polycondensation for the IV increase of PET and PES pellets. After the Starlinger iV+ process, the crystalized pellets can be used as a substitute for virgin PET resin at up to 100%. In addition to being... Read More
The recoSTAR universal is a recycling machine designed for processing plastics such as PE, PP, PS, PES, PET, PPS, or PLA. The line is equipped with a high-performance ACTIVE shredder, which makes it the machine of choice for bulky and hard-to-grind materials.
Typical applications are:
• solid... Read More
Recycling line - recoSTAR dynamic
The latest recycling technology for the processing of films, fibers, and washed post-consumer waste from materials such as PE, PP, PET / PES, PA, PLA, PS and PPS.
Ecological, economical, energy-saving
- these are the three keywords to describe the new recoSTAR... Read More
The recoSTAR HDPE FG+ is designed specifically for the processing of hot-washed HDPE flakes for reuse in food-contact applications. The line is available in three machine sizes which cover an output range of 1,400 – 7,275 lbs./hr.
Through Starlinger’s super-cleaning recycling process,... Read More
StarMed TPE alloys particular class of TPE material for medical products and tubing applications. Some of the StarMed product family qualities:
•Meets FDA and medical grade requirements
•Versatile, non-allergenic and recyclable
•Replace latex based material
•Soft TPEs 8 Shore A to Hard TPEs... Read More
StarPet TPE Compounds are specially designed for high wear and tear pet application. Unique qualities include
•High Tensile strength
•High Tear strength
Great for pet toys! Read More
Facilitating and driving the creative process to develop and refine your growth strategy. Depending on your needs, we can provide help in building the complete plan, or pieces of it (Situation Analysis, Segmentation, SWOT Analysis, Competitive Analysis, Strategic Objectives, Marketing Plans,... Read More
StarXtrude TPE alloys are perfect match for extrusion applications. Some of the StarXtrude family qualities:
•Soft rubbery feel with matte finish
•Excellent chemical and oil resistance
•Adherence to PC, ABS & PC/ABS
•Excellent processability with fast setup rates Read More
Upon disassembly of your tool, we treat your tool like a piece of fine jewelry. Running it through our ultra sonic process your tool comes out looking like a fine diamond.
The cleaning power is produced by the ultrasonic waves and transducers, attacking the areas we cannot touch, see or feel.... Read More
Static bars, also known as, static eliminators or anti static bars, are a very cost effective way to remove static electricity on a web of material in a plastics, paper, glass, textile, and or film converting applications. All of these static bars are bi-polar ionization generators (produce both... Read More
Thermoforming trays attract dirt and contamination resulting in rejects. Simco-Ion’s Phoenix Static Control Blower installed directly above the delivery of the thermoformed trays offers improved product quality with the reduction of dust and dirt. Read More
Injection molded parts can have high static charges which attract airborne contamination, resulting in product rejects. Operators may also experience uncomfortable shocks when working next to the collection bin.
A Simco-Ion Phoenix Ionizing Blower provides ionization to quickly neutralize the... Read More
A static control liner is used to protect against unwanted static discharges in an electrostatically sensitive environment. With our conductive static control liners, the generated charges are safely drawn through the conductive material and discharged by grounding the package, eliminating... Read More
The Zwick materials testing machine concept includes three ranges for static materials testing, allowing the optimum testing machine to be provided for every requirement, with the best price/performance ratio. The ranges of our materials testing machines differ in configuration, equipment,... Read More
Recycling equipment from Costarelli USA, Inc. includes the company's steam cleaning system machinery. The steam cleaning system removes the pollutants present in a gaseous contaminated flow by contact with water. This operation is intended to encumber the existing solid particles and thus... Read More
Deublin is the worldâ€™s largest manufacturer of Rotating Unions. These precision engineered products are used in an almost endless variety of applications.
In 1985 Deublin introduced a new technology for condensate removal from paper machine dryers. For the first time, a Stationary Siphon... Read More
Neue Herbold - mechanical Dryer TM Series are used as a downstream component after a washing process. It is used for surface drying of the material fraction primarily for film flakes, granulate from PET bottles and other rigid types of plastics.
A leading brand in antimicrobial additives. For incorporation into any material to prevent the growth of harmful bacteria and mould using safe ionic silver technology. Customers include Mothercare, Crown Paints and Universal Electronics. No licensing fees and ongoing product and marketing... Read More
Choose from a wide range of water and hot oil temperature control units available to suit your injection molding, blow molding, extrusion or other industrial process needs. Each TCU combines precise, automatic temperature control with easy operation for unmatched reliability and performance.... Read More
The Label Scraper LS removes labels and external dirt from bottles by mechanical friction between cutting elements on a rotating drum and fixed elements in exchangeable housing component. The stator elements can be pre-adjusted for different bottle sizes and can be adjusted if necessary. For... Read More
Like all our cases, PFC stock cases are molded from high-density polyethylene (H.D.P.E.) and incorporate our patented mechanical hinges and latches – providing you with a durable, high-quality product.
We offer lots of options for stock cases, including colors, logos and trays. If you find the... Read More
Stock hand grips are available in our most popular styles, sizes, and materials. They are available for immediate shipment and can be ordered in smaller quantities than most of our grips. Order now from our online store. Read More
Storage bins and hoppers provide dry bulk material processing operations an efficient, space-saving, cost-effective, and clean method for temporary storage or transport of dry material; particularly when compared to gaylord containers. A versatile alternative to fixed conveyors and silo storage,... Read More
Our partner STRACK NORMA is a producer of standard parts. The usage of standard parts brings massive advantages to the tool production process. They allow a flexible calculation of the production and eliminate the risk of inconsistent product measurements. Their standard parts are a must-have... Read More
microPEP supplies off-the-shelf and custom Strain Relief Boots. Call and order our 900 Micron Strain Relief Boot, MX-125 molded from Santoprene 251-70W232, Black. Custom sizes and configurations are also available, but would entail an extra tooling charge. Please call microPEP to order or... Read More
Developed and engineered for the production of most thermoplastic pellets
Sound dampening system isolates cutting chamber from all other components, which reduces noise levels from 75dBA to 85 dBA (depending on product and type of operation)
Choice of replaceable rotor, blade or milling-type... Read More
Freed from the constraints of traditional (subtractive) manufacturing methods, additive manufacturing allows manufacturing engineers to produce tools that were previously considered far too complex to make economically. Stratasys Production Series 3D Printers also help you make faster changes to... Read More
Moldex3D Stress software provides complete stress simulation capabilities for parts and part inserts. By setting up boundary conditions on meshes, such as stress or force, structural performance can be accurately visualized and analyzed, avoiding potential quality problems. Read More
One of our main specializations is creating molds for the packaging industry. Blow mold manufacturing is best suited for hollow parts that require a consistent thickness. We work within your tolerances to create a final product you can be proud of. Read More
The Serac Combox brings together all the benefits of blowing and filling innovations in an integrated blow-fill-cap solution which delivers outstanding hygiene performance while simultaneously cutting costs. Combox is the only integrated solution combining linear blow-molding with weigh filling... Read More
This automatic packing machine to wrap with stretch film is the ideal solution when a further protection of the coil is required on the outer diameter. It requires a small quantity of film, operates automatically collecting the reel from the coiler and unloading it in the direction of the... Read More
Pyramid Packaging features ARPAC’s Stretch Wrapping machines. ARPAC's Stretch Platform, Rotary Tower and Orbital Stretch Wrappers are one of the most complete line of stretch wrapping systems in the industry. ARPAC stretch wrappers can pallet wrap both stable and unstable pallet loads. With load... Read More
AmTopp Stretch Film is produced in the largest single-production-site in the United States. We produce the most cost-effective, high performance products in the industry with the most technologically advanced equipment and superior raw materials. We are committed to quality and our... Read More
Precision cutting for Plastics.
STRIEBIG vertical panel saws from Switzerland, and distributed exlusively in North America by Colonial Saw, have a renowned reputation for quality and precision cutting in a wide variety of materials including most plastics. STRIEBIG panel saws are safe, easy... Read More
Mica Strip Heaters can be manufactured as a standard strip with 3/8” fold over or as a butt case design. We can manufacture Strip heaters up to a maximum of 600 volts. (Please note any heaters manufactured over 480 volts are not covered by a warranty) Recommended watts for a standard Strip... Read More
Structurally engineered thermoplastics are an excellent alternative to metal in applications where strength, dimensional stability, and toughness are important.
Reinforced compounds offer dramatic improvements over neat resins in stiffness, tensile strength, load-bearing ability, and other... Read More
Reaction Injection Molding (RIM) - provides structural ‘one-piece’ solutions for your enclosures and structural parts. Polyurethane, the material created by the RIM process is injected into the mold (tool) at a very low viscosity where it chemically reacts and cures. Since such a low-viscous... Read More
20/20 Custom Molded Plastics has the perfect vision and perfect control to help you take full advantage of these many benefits of structural foam molding.
Larger part size - shot sizes up to 200 lbs.
• Durability, strength, and manufacturing efficiency
• Dimensional accuracy over the... Read More
20/20 Custom Molded Plastics can help you determine the molding process that will work best for your needs, with a cost-effective solution.
• Thinner walls and hollow parts for large, structural components
• Smoother surface finish that rivals high-pressure injection molding
•... Read More
CGS Suction modules by tube frame for size 8, 10, 12, 20mm tubes adopting. It is easily plug and work without any expert help. That's why most users like it.
They are for light weight and heavy weight industries use. Read More
Sukano is your expert in the development and production of Color Masterbatches in PET. We have many years of experience and the required tools to tailor match colors exactly to your specification.
We offer a wide range of colors, either opaque or transparent. As all our masterbatches are highly... Read More
The Superior Double Ejection (DX) is the first double ejection mechanism in the market that works also as ejector guide pins and bushings simultaneously. This feature permits the mouldmaker to avoid installing any other guide pin or bushings rather than the ejection mechanism system from Cumsa,... Read More
The SB SuperWHITE ink was formulated for dark-colored textile.
The SuperWHITE uses a special pigment that increases print opacity and allows mixed ink to maintain proper viscosity during the production shift. Read More
The SurePeel automated seal strength tester is a critical tool for your quality control program. The SurePeel is motorized and utilizes a force transducer to measure the strength of a seal based on ASTM standards. The system is ideal for measuring seal strength of flexible and rigid material... Read More
The SureVac™ allows a user to test a sealed package in a water-filled vacuum chamber to a preset vacuum level for a specific amount of time. Air bubbles are an indication of a leak. An immediate seal failure is indicated by a “burst” of the package in the water. Read More
Dyne Technology supplies a complete range of Dyne Pens to measure surface energy. Using a Dyne test pen gives quick and easy results indicating surface wettability. The low surface energy of polymer-based substrates often leads to poor adhesion of inks, glues and coatings. To obtain optimum... Read More
Mold In Graphic Systems® popular product, Surface Enhancer®, now comes in a new can design! The all-new Surface Enhancer® 360 is still the great product that rotational moulders know and ask for.
Spray it on your mould from any angle. Due to its revolutionary new design, the can won't clog.... Read More
At Cadence, we know the most sophisticated devices have a high level of complexity that dictates ultimate success in the operating room. It’s the 80/20 rule, where 20% of the complex parts are responsible for 80% of the final success.
We make the 20% that is complex and not because it is easy,... Read More
Cadence operates two dedicated facilities for producing finished products for our contract manufacturing and assembly customers. 28 of the top 30 OEMs trust us as a supplier for our capabilities:
Certified ISO Class 8 (100,000) cleanrooms
Cleanroom injection molding and laser welding... Read More
Surlyn Reflection Series thermoplastic alloy technology provides an unmatched combination of high-performance and appearance properties. Surlyn Reflection Series resins, a patented alloy of DuPont Surlyn resin and nylon 6, afford the production of tough, durable, class A finish parts that... Read More
Chroma Color Corporation supports sustainability and has options for customers, resins and additives made from renewable resources and stabilizers to promote recycling while preserving the physical properties etc. Chroma Color Corporation is an active and responsible member of our... Read More
>SAS< Automation is pleased to announce the addition of modular gripper components specifically for tool builders to better understand their “green” tooling options for reducing carbon emissions as well as reducing cycle times. The system identifies three types of EOAT systems:
Green EOAT... Read More
Gammaflux L.P. is the world’s leading supplier of temperature and sequential valve gate control systems to the plastics industry. An expert in process optimization, Gammaflux partners with plastics parts manufacturers to help them achieve higher quality, efficiency, and profitability. The... Read More
The Combi SW-10 semi-automatic pallet wrapping machine is an uncomplicated, easy to operate machine that is logically inexpensive. The SW-10 is designed and manufactured with a manual mechanical core braking film tensioning system that simplifies threading of the film. Forklift pockets provide... Read More
•Adaptable to every robot
•Economical, one-time investment per robot
•Makes EOAT interchangeable between robots
•Minimizes downtime during setup changes
•EOAT Gripper stays aligned & secure
•Integrated pneumatic quick disconnect system
•Lightweight aluminum base plates for standard... Read More
SX Grade is a high-temperature purging compound for thermoplastic injection molding and extrusion machines. SX Grade is designed to maintain thermal stability at high processing temperatures while facilitating material and color changes. It is uniquely suitable for purging super-engineering... Read More
SYLYSIA is Fuji Silysia's world wide trade name for micronized, synthetic, amorphous, pure silica. SYLYSIA is a colloidal silica characterized by large internal surface area with large number of pores, forming a three-dimensional structure by the propagation of silicic acid. These properties... Read More
SynFlow® is a two-speed pin control technology for cascade or sequential valve gated hot runner systems. The initial opening speed of the valve pin is reduced to prevent an explosive rush of pressurized plastic. The valve pin then opens for the remainder of its stroke at maximum speed to... Read More
The full functionality of SYSPRO ERP Software is available with SYSPRO Cloud ERP Services, which meets the needs of manufacturing and distribution companies that want the benefits of an ERP solution but do not want to, or cannot afford to, purchase and maintain hardware or manage an in-house IT... Read More
SYSPRO’s solutions for plastics and rubber are designed to complement and improve production efficiency, promote lean manufacturing, optimize cost management and enhance revenues and profitability.
Our modules provide full traceability for materials throughout the supply chain from raw material... Read More
SYSPRO ERP software offers a single solution for companies looking to gain increased operational effectiveness. Available for deployment web-based or on-premise, it requires no more than one installation, greatly simplifying the process leading up to full implementation and... Read More
The powerful tools in SYSPRO’s Inventory Management suite provide you with superior inventory control, traceability and recall management to be able to optimize stocking levels, free-up working capital, provide more effective customer servicing and benefit from improved profits. Read More
SYSPRO Manufacturing Operations Management supports your complete manufacturing lifecycle, providing you with a 360° view of your production. This solution enables you to automatically connect with machines in order to read data without manual inputs. Read More
The externally heated EWIKON HPS III system offers an advanced naturally balanced, manifold technology with streamlined flow channels which can be combined with a wide range of externally heated high performance nozzles. A diversity of gating options makes the system suitable for for almost all... Read More