Products by Brampton Engineering Inc

Brampton Engineering heavy duty extruders combine the rugged design needed to run under full load for 24 hours a day with the flexibility to run a wide range of polymers. An extruder is an integrated system combining many components

Extruder Screw: Since it is the key component, we custom engineer each screw to provide optimum processing characteristics

ITALYCS® (Integrated Temperature and Line Yield Control System) allows operation of the entire line from one location, minimizing operator involvement, simplifying operation and reducing scrap.

Continuous loss-in-weight blenders are fully integrated with the ITALYCS® control system. The main resin and each additive is weighed and fed into the extruder feed throat. The additives are fed by augers that are interchangeable for different throughputs. All blender controls, recipes and data...

New! FlexSTACK SCD® (Streamlined Coextrusion Die) With a size reduction of approximately 50% over its conventional SCD®, the FlexSTACK SCD® is now the most compact barrier film coextrusion die in the market.

The Eliminator Dual Lip Air Ring combines versatility, ease of operation and improved throughput and film qualities.

4 + 1 Pancake style internal air distribution system: cast aluminum assembly with four high velocity jets which impinge on the bubble at graduated levels for efficient cooling. A fifth jet directs air towards the die lip exit to precool the melt

Innovative Design of I-Flex Heated Lip produces blown film with excellent gauge.

Infinitely adjustable through layflat range. Motorized diameter adjustment, controlled from floor level. Five levels of guide arms with eight arms per level ensure excellent bubble stability.

Brampton Engineering’s Horizontal Oscillating Haul-off is a cost effective solution to randomize gauge variation and improve roll quality.

BE Turret Winders with linear lay-on and gap winding capability offer the operator total control over roll tension and air entrapment so that even the most difficult film structures can be wound without roll defects.