Plastics_TLB_8.31.20

Products by Celanese Corporation

Rating: 0 - 0 reviews
  • Celanex® thermoplastic polyester (PBT)

    A fast-cycling resin with high strength, rigidity and toughness. Celanex PBT exhibits low creep, even at high temperatures, and resistance to a wide range of chemicals, solvents, oils and greases. When you add to this list excellent dimensional stability, low moisture absorption and powerful... Read More
  • Celcon® acetal copolymer (POM)

    Celcon offers high strength and rigidity over a broad temperature range, low wear, toughness and resistance to repeated impact. It is notable for its superior dimensional stability, long-term creep resistance, long-term fatigue resistance and excellent resistance to moisture, chemicals and... Read More
  • Celstran® continuous fiber reinforced thermoplastics (CFR-TP)

    Unidirectional tapes, rods and profiles provide high levels of stiffness and toughness, high-performance dimensional, mechanical and thermal properties, and superior chemical and corrosion resistance. Read More
  • Celstran® long fiber reinforced thermoplastics (LFRT)

    Celstran LFRT are produced by pultrusion technology in which the long fibers are fully impregnated thus delivering optimal reinforcement to the plastic matrix. Unlike conventional short-fiber reinforced materials, the longer fibers present in molded parts of Celstran LFRT mechanically interact... Read More
  • Compel® long fiber reinforced thermoplastic (LFRT)

    To extend your range of processing possibilities and to allow you to reap the benefits of very high modulus and extra high impact strength, Compel is an excellent material for extrusion compression molding. Compel LFRT products are made using a process that thoroughly wets out the glass... Read More
  • Factor® long fiber-reinforced thermoplastics (LFT)

    The LFT in the Factor® product family are manufactured in a patented process in which the fibers are completely impregnated in the pellet to ensure consistently high material quality as well as: Outstanding strength and stiffness, very high impact strength and excellent temperature... Read More
  • Fortron® polyphenylene sulfide (PPS)

    Fortron is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C (392° F). It also shows tremendous stability in both typical and alternative... Read More
  • GUR® ultra-high molecular weight polyethylene (UHMW-PE)

    GUR offers outstanding abrasion resistance, superior impact resistance, non-sticking and self-lubricating properties and excellent mechanical properties, even in cryogenic conditions. GUR is an extremely high viscosity polymer that is produced in the form of a powder and has an average particle... Read More
  • Hostaform® polyoxymethylene copolymer (POM)

    Hostaform is a highly crystalline engineering thermoplastic resin whose balance of properties and ease of processability offer performance and cost advantages. Hostaform offers high strength and rigidity over a broad temperature range, low wear, toughness (down to –40°C) and resistance to... Read More
  • Impet® thermoplastic polyester (PET)

    Like products based on its chemical cousin PBT, those formulated with PET base resin offer outstanding physical properties and superior thermal and chemical resistance, with the added ability to support higher temperature exposure. Glass-reinforced Impet polyester products are outstanding... Read More
  • Riteflex® thermoplastic polyester elastomer (TPE-ET)

    Thermoplastic elastomers represent an ingenious combination of hard and soft segments so as to provide many of the desirable properties of thermoset elastomers with the processing ease of thermoplastics. Riteflex elastomer products combine toughness, tear and flex fatigue resistance with the... Read More
  • Thermx® polycyclohexylene-dimethylene terephthalate (PCT)

    Take everything you like about PBT or PET polyesters; then add more resistance to peak temperatures and hydrolysis. The result: Ticona Thermx® PCT, the latest in a range of high performance polymers now added to the Ticona portfolio. Attributes and features include: - High-temperature assembly:... Read More
  • Vandar® thermoplastic polyester alloy (PBT)

    Drawing on the basic properties of PBT enables Vandar alloys to achieve high ductility and good stiffness with excellent chemical and thermal resistance. These alloys are easy to mold and retain their impact strength down to -30° C (-21° F) and are available in both unreinforced grades and as... Read More
  • Vectra® liquid crystal polymers (LCP)

    Vectra LCP are highly crystalline, thermotropic (melt-orienting) thermoplastics that can deliver exceptionally precise and stable dimensions, high temperature performance and chemical resistance in very thin–walled applications. Ticona has numerous patented LCP polymers that provide a wide... Read More
  • Zenite® liquid crystal polymer (LCP)

    Zenite resin not only takes the heat it also excels in all-around performance and molding productivity. Choose it over ceramics, thermosets, PPS or competitive LCP’s to downsize parts, upgrade performance, accelerate production, reduce system costs and develop new markets. Attributes and... Read More

Rate and Review Celanese Corporation

Rating: 0 - 0 reviews Let users know what you would have wanted to know about this company