Products by Tempco Electric Heater Corporation

Models TEC-4300, TEC-8300, TEC-9300 and TEC-2500 feature universal sensor input, fast sample rate, fuzzy logic PID autotuning control, 2-4 independently programmable outputs/alarms, universal power input, heater break alarm, bumpless transfer to manual mode, analog retransmission and NEMA... Read more »

Why spend your valuable time engineering, designing, sourcing components and building Industrial Power Control Panels? Our UL 508A Certified Panel Shop can meet all your requirements for a multitude of processing control applications, from the simplest single zone panel to the most complex... Read more »

Tempco TPC Portable Temperature Control Consoles are quality built self-contained systems for monitoring and controlling process temperatures in a wide range of fixed or portable applications. These 1 to 4 zone units use our reliable next generation TEC-9100 1/16 DIN auto-tuning fuzzy logic PID... Read more »

Mi-PlusTM is a mineral insulated band heater designed for applications that require high watt density and/or high operating temperatures. Mi-Plus band heater has a thin low profile cross section using all stainless steel sheath material. The clamping brackets are formed from the outer sheath... Read more »

Tempco Electric Heater Corporation, Ceramic Insulated Band Heaters conserve energy by using a 1/4" thick ceramic fiber insulating blanket reducing power consumption by 25 to 30 percent. Because of the low thermal conductivity of the ceramic fiber insulation the external surface temperature of... Read more »

Tempco's Flexible Heaters made with Silicone Rubber or Kapton insulation are capable of operating with excellent performance under many adverse conditions, including: moisture, outdoor exposure, or ambient temperatures, radiation, ozone, compression set, vacuum, fungus, oils, solvents, and many... Read more »

TEMPCO Finned Strip Heaters are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens). The Finned Strip Heater's basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The... Read more »

Screw Plug Immersion Heaters consist of tubular elements welded or brazed into a threaded screw plug which can then be inserted into a threaded opening in a tank wall or through a mating full or half coupling. Read more »

Standard industry sizes and ratings up to 60wsi. (interchangeable with CRC, CRB, CRN, CRZ Ceramic E-Mitter heaters) • Designed for use in CRA linear structural housings and easily adapted to any CRA array assemblies • Two mounting styles available; Single point ceramic header with clip(s) in... Read more »

Tempco's dedication to quality and product improvement has led us to the development of a second generation of Mightyband heaters. Manufactured for trouble-free performance in operations involving heating of cylindrical, flat, and irregular-shaped surfaces where precise temperature control is... Read more »

The Tempco Terminator Lead Conversion Program guarantees 1 to 3 day shipping on custom terminated heaters. By maintaining over 65,000 Hi-Density Cartridge Heaters in stock in order to offer you over 1000 standard sizes and electrical ratings and 26 lead terminations to select from. Hi-Density... Read more »

The PPR-1800 is a high specification graphic recorder capable of plotting up to 18 channels of analog input, 36 channels of digital data or a combination of both. Engineered in a heavy gauge sheet metal, the case is designed to meet the requirements of an industrial environment. The recorder is... Read more »

The "Pennybottom"TM Cartridge Heater is designed for plastic injection runnerless molding hot tip bushings pin-point gating torpedoes/probes and manifold bushings. The unique feature of the Pennybottom (Hi-Density swaged) Cartridge Heater is the use of a flat copper end disc to maximize heat... Read more »

Circulation Heaters consist of Screw Plug or Flanged Immersion Heaters, depending on kilowatt rating and size, mated to a pressure vessel. All welded joints on the vessel and heater are hydrostatic pressure tested. Mounting brackets provide easy and quick installation. Typical Applications: ·... Read more »

This design consists of tubular heating elements silver brazed or TIG welded to a flange cut from steel or stainless steel plate. Flange plate size, thickness and shape are determined by the application. A fiber gasket is supplied with each heater. The various style heaters are direct... Read more »

Tempco is widely recognized as the industry leader in manufacturing Cast-In heater/coolers for the plastics industry. Our capabilities and the application possibilities for utilizing Cast-In Heater Technology extend far beyond the scope of plastics machinery. Tempco has set industry standards... Read more »

Tempco is widely recognized as the industry leader in manufacturing Cast-In heater/coolers for the plastics industry. Our capabilities and the application possibilities for utilizing Cast-In Heater Technology extend far beyond the scope of plastics machinery. Tempco has set industry standards... Read more »

Tempco's Cool TO-THE Touch extruder heat/cool systems are custom engineered to provide optimal heating and cooling while providing personnel safety with a Cool Touch perforated outer layer. These systems are designed with finned cast-in heaters that optimize overall system efficiency. The... Read more »

LDWR - Spooled High Temperature Lead wire: All of Tempco’s High Temperature Lead Wires are designed for: • Internal wiring for commercial and industrial heating products • Heaters • Heat treating furnaces and kilns • Commercial food service equipment LDWR - Teflon® / PTFE Spooled Lead... Read more »

Hi-Density Cartridge Heaters are suitable for temperatures up to 1400ºF (760ºC), except 1/8" which is suitable to 1200ºF (650ºC), and are available in the following diameters: 1/8", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" 1", 6.5mm, 8mm, 10mm, 12.5mm, 16mm and 20mm. NOTE: If you require a... Read more »

Process air duct heaters are used for tempering forced air in many industrial processes. Heater wattage is dependent on air outlet temperature (up to 1200°F [650°C]) and air velocity. Smaller duct heaters can be tandem mounted in place of one large unit to meet space limitations and simplify... Read more »