1/3/21- Plastics- TLB

Reviews For ICOMold

Average Rating: 4.6 - 19 reviews
  • Customer  | 5/10/2021
    Do not recommend for complicated parts. Engineering is outsourced overseas. Local support not very helpful. DFM reports missing critical information unless specifically asked for.
  • Customer  | 2/24/2020
    Thank you for all the help during the mold creation process. You helped me immensely with your explanation of certain plastics and things I was unfamiliar with. This gave me immense confidence during the project and has been a great teaching experience for me. I will keep your company in mind and you will be the first people I contact should a need ever arise again.
  • Customer  | 2/24/2020
    The parts are great! We had the product at the CES show, and it was very well received. Thanks very much to all of you. It’s been a pleasure to work with you, and I look forward to our next job!
  • Customer  | 10/7/2019
    I just wanted to let you know, we have all been very impressed with the quality and turnaround time of our parts. We have used several shops in the past, but so far the quality of ICOMold has been the best we have ever received.
  • Customer  | 10/1/2019
    We appreciate the effort you put into making our order smooth. The molded parts are used in our device that makes water safe to drink in areas of the world that do not have access to safe water. Thanks again for everything!
  • Customer  | 1/22/2019
    We are very pleased with ICO Mold. Response time is fantastic, customer support is great, and the online group project management tool is very helpful.
  • Customer  | 7/31/2018
    The quality of the prototype is outstanding! My client has thoroughly tested it. You've been outstanding to work with (and that comes from someone with 45 years experience dealing with manufacturers)!
  • Customer  | 2/27/2018
    The workmanship was outstanding - we are over-the-top happy with the unit! The product that arrived at my door far exceeded our expectations, and all on short notice...amazing. Please pass our very best wishes on to everyone on your team who was involved in fast-tracking our prototype. It all started with you and your can-do attitude, Nate. I cannot thank you enough!
  • Customer  | 11/2/2017
    Be prepared to change your design after you pay your deposit! During initial correspondence they confirmed our design was moldable. After we paid our deposit they insisted we change the draft angle by 3 degrees. Since this was not possible for us and they would not offer any alternative tooling strategies (i.e. additional slides), we cancelled the project and they now refuse to return our full deposit. Very disappointing (and expensive) experience.
  • Customer  | 10/4/2017
    Fit and finish is great and the parts passed all our regulatory tests. Thank you for all your help and for the role you played helping the factory work through some of the stickier parts of the design.
  • Customer  | 7/25/2017
    The part from ICOMold works as intended and their service is outstanding.
  • Customer  | 6/27/2017
    I want to thank ICOMold and the team for the great support. Over the 15 years that I have been working with mold vendors, I have never seen such personal attention and such great communication efforts in addressing my concerns on samples. I know that I have made the right choice going with ICO. I'm looking forward to a long relationship with the ICO team.
  • Customer  | 6/27/2017
    I honestly don't know how these two projects would have turned out had we not found ICOMold. The quoting process and the back and forth with the team for the design was as easy and painless as it could be. Top notch. We already have plans for 2 more projects involving 3 more molds that, hopefully, will be done this year.
  • Customer  | 10/6/2016
    I found it refreshing to work with a company with such a phenomenal online quoting tool. It allowed us to experiment with different materials, quantities, and mold configurations to see the cost impact in real time.
  • Customer  | 10/6/2016
    As a small, growing company, we cannot say enough good things about ICOMold. They have been willing and able to adapt to our rapidly changing needs and have helped us get out of a pinch on occasion. They have been great to work with!
  • Customer  | 9/1/2016
    I really enjoy working with you on these projects. I have done quite a few injection parts and never has the tooling approval process been this organized and well-documented. Thank you for a great experience.
  • Customer  | 9/1/2016
    Here is a huge milestone for the team and I. This product is no longer a vision... I received the parts today from ICOMold. They look and function great! I don't see any reasons why we cannot move forward now and order parts for our proto build coming up.
  • Customer  | 9/1/2016
    I was very impressed with this company's ability and willingness to work with a novice in plastics as I am, and work through some design changes. I have learned a lot from you and hope this is a huge success for both of us. Frankly, I did contact two other companies and they acted like they had no time for me!
  • Customer  | 9/1/2016
    After reaching out to over 20 manufacturers, ICOMold was the only one that was able to take on my project, create the molds and manufacture the parts I needed. They helped turn my idea from a prototype to a fully functioning product. What impressed me the most is that they were able to work overtime to meet my demanding deadline and get the parts to me on time.

Rate and Review ICOMold

Rating: 4.6 - 19 reviews
Let users know what you would have wanted to know about this company.
Click on a star to rate this company
  Privacy Policy.
When writing a review, please adhere to the Review Guidelines.