Products by Allgrind Plastics, Inc.

Granulation - Coarse Grinding: Granulation or Coarse grinding size reduction is offered for raw materials in large forms such as sheets, lumps, purgings, cylinders, rods, tubes, blocks, bales, slabs etc.—most any shape, as well as for scrap materials to be recycled such as parts, sheets, pipe,...

Pulverizing - Fine Grinding: Pulverizing or Fine size reduction is offered for raw materials in pellet, bead, chip, crumb, flake, or granulate form. Materials can be pulverized to the mesh or micron particle sizes required. Thermoplastics, thermosets, rubbers, and most any tough or soft material...

Packaging: Finished products can be packaged in any container required, including Supersacs or Bulk bags, Gaylord boxes, Drums, Bags, etc. Re-Packaging only is also offered for any material from and into any containers.

Laboratory Processing – Lab Grinding, Pulverizing, Sifting: Small samples for R&D purposes or small orders of material can be Granulated, Pulverized, Sifted or Screened with or without cryogenics as needed to most any particle size required.

Blending - Mixing: Dry materials and additives can be blended in batches up to 5000 lbs. either before or after grinding or sifting. Blending is also offered as a standalone service for materials that do not require size reduction.

Cryogenic Pulverizing - Fine Grinding: Fine size reduction with liquid nitrogen cooling is offered for any raw material in any form. Cryogenic grinding is necessary for materials with a low melting point or those that are very tough and difficult to grind fine without extra cooling to prevent...

Sifting - Classifying: Materials are usually sifted in line with grinding to control the upper or lower limit of the specified particle size. Sifting or screening to 1/2" down to 200 mesh or 12.5 mm to 75 microns is offered as a standalone service to separate oversize or undersize from powdered...