Products by Munson Machinery Co,

The Munson Rotary Batch Mixer offers 100 percent uniform particle distribution, 100 percent uniform liquid coatings, the fastest cycle times, gentle product handling, the lowest energy consumption per pound of blended product per hour, and complete discharge with no segregation of blended products....

This scaled-down version of Munson's Rotary Batch Mixer offers capacities from 0.25 to 15 cu-ft. for laboratory, pilot plant and small production applications, including pre-blends. - 100% uniform mixing in less than three minutes - Gentle four-way mixing action -- tumble, turn, cut and...

Cut costs by reducing bulk waste, scrap and out-of-spec materials by 50 to 80% * Shreds plastics and purgings, wood products, carpets, glass, aluminum, PET bottles and various industrial, medical and manufacturing waste products. * Handles the toughest size reduction problem materials with...

The Munson Hammer Mill reduces a broad variety of friable and fibrous materials into very fine products in uniform size ranges from 20 to 300 mesh. * Motor drive directly coupled to rotor assembly. V-belt drive optional. * Large, obstruction-free product feed opening. * Convenient...

Munson stationary horizontal blenders offer high mixing speed, efficiency, and wide range of features and options to suit the most demanding applications: * Capacities from 1 to 1000 cu. ft. * Ability to blend 1% concentrate to perfect analysis, in batches over 6 tons. * Broad design...

The CX Heavy Duty Cutter is a single-rotor high torque cutter/hog with a positive, high profile raking action (unlike a shredder) for primary size reduction of large, bulky materials which require greater torque than other cutters provide. The CX Heavy Duty Cutter delivers high horsepower at low...

Munson Machinery’s SCC-15-B reduces hard, soft and fibrous materials into controlled particle sizes at high rates with minimal fines. It features a proprietary rotor design comprised of cutter heads attached to a helical array of staggered holders called "interconnected parallelograms" that...

Munson’s 18-inch (457 mm) diameter Centrifugal Impact Mill model CIM-18-SS provides coarse to fine (400 mesh) grinding of friable materials into controlled particle sizes, as well as de-agglomerating and conditioning of dry solids. A direct drive system reduces the unit's footprint to about...

The Munson Vee-Cone Blender discharges fully and sanitizes quickly. It is comprised of two inclined cylinders that rotate, causing bulk material to fall and converge during half of the rotation, and divide during the other half. This achieves uniform blends more rapidly than standard Double Cone...

The Munson Fluidized Bed Mixer is a machine of extremes, offering unique benefits within a narrow range of applications in which its limitations are not a factor. It is among the fastest of all mixers, with cycle times of 10 seconds to two minutes, with one minute typical, yielding a ~5% CV...

Model VB-10-316S Sanitary Vee-Cone Blender with 10 cu ft (283 liter) capacity has been introduced by Munson Machinery. The smooth internal surfaces are free of baffles, shafts and bearings, allowing unobstructed material flow, as well as complete discharge through a gate valve. The absence of...

This 5 cu ft (142 liter) capacity Fluidized Bed Mixer model MF-5-SS gently mixes low- to medium-density bulk materials, including liquid additions, in 10 seconds to two minutes, with 30 seconds typical. Unlike ribbon, paddle and plow blenders with a single shaft turning agitator blades slowly...