PA Robot

PA Robot

MB Conveyor's flat "PA" conveyor is completed by polycarbonate guards to protect the operation of the robotic arm, becoming a "PA Robot" model.
The PA model conveyor (110x30 mm lateral section) is found to be the most suitable for this purpose because of:
- the sturdiness and solidity of the structure;
- the possibility of installing/removing the containment side panels;
- possibility of installing control photocells above the side panels and inside these;
- facility of installation of the Robot protection structure.

• Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation average thickness 15 micron.
•Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); vulcanised belt joint.
• Minimum and maximum temperature resistance of belt: -10°C to +90°C.
• Standard transmission group consisting of 0,12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication.
• Fixed standard conveyor speed 3 m/min.
• Conveyor complete with Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground).
• Standard motor supply voltage 400 Volts/50 Hz.