Products by MB Conveyors Srl

MB Conveyor's flat "PA" conveyor is completed by polycarbonate guards to protect the operation of the robotic arm, becoming a "PA Robot" model. The PA model conveyor (110x30 mm lateral section) is found to be the most suitable for this purpose because of: - the sturdiness and solidity of the...

Separator with rotary drum consisting of 24 PVC rollers having 50 mm diameter and 800 mm length (the distance between the rollers can be adjusted manually). Each separator has its own Inverter for regulating the drum rotation speed; Possible adjustment range: minimum 4 rotations/minute, maximum 20...

Standard L-shaped conveyor, especially suitable to collect molded pieces from below the IMM and bring them to a higher level, to be conveyed to a tranportation line, a sprue separation device, or a storage station. Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by...

Z-shaped conveyor equipped with special MB-patented modular plastic belt, whose containment side edge does not open even during the rotation of the slat belt on the drive sprockets. Contact surface slightly high grip,operating temperatures +1°C to about 130°C. Possibility of applying special slats...

Since 1991, MB Conveyors has produced a very efficient system to eliminate damage caused to PET preforms during storage inside the container. Operating principle of the Soft Drop: the moulding cycle is received from the IMM and conveyed by means of a CPT conveyor to the PA conveyor/distributor...