Product Overview
N-CPR conveyor
Standard L-shaped conveyor, especially suitable to collect molded pieces from below the IMM and bring them to a higher level, to be conveyed to a tranportation line, a sprue separation device, or a storage station.
Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation treatment thickness 15 micron.
Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); with heat-welded slats h=30mm with pitch 400 mm; vulcanised belt joint.
Minimum and maximum temperature resistance of belt -10°C to +90°C.
Standard transmission group consisting of 0.12 kW three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication.
Fixed standard conveyor speed 3 m/min.
Conveyor complete with Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground).
Standard motor supply voltage 400 Volts/50 Hz.
On demand, an Easy Line version is available, with simplified supporting legs wich allow a reduction of about 10% on the conveyors’ final price.
No reviews yet. Be the first to share your experience.
Help others choose confidently by sharing your feedback.
