Products by EOS

This polyamide-12-based material is white and contains a halogen flame retardant. Thanks to its good refreshability, it is very cost-efficient compared to other flame-retardant materials. The additively manufactured parts are elastic with good tensile strength and are used in the interior of...

Materials of this class are the second most important type of plastic, accounting for around 20% of the global production of plastic parts. Chemically speaking, polypropylene is relatively similar to polyethylene, but its material properties make it significantly harder, stronger and more thermally...

The high-performance polymer is based on an unfilled PEKK and shows higher elongation at break and impact strength while maintaining high tensile strength compared to the carbon fiber-filled material HT-23. At high operating temperatures in the range of 80-180°C, the material demonstrates its...

This dark gray PA 12 material is filled with both hollow glass beads and carbon fibers. This makes it exceptionally temperature-resistant and rigid, but also very light.

Parts made from this white polyamide 12 powder filled with glass beads have high rigidity and good elongation at break. They are also especially resistant to wear and tear, and thermally resilient. This material is used mostly in vehicle engines and molding material for deep-drawing tools.

This white polyamide 12 powder is equipped with a halogen-free chemical flame retardant. Underwriters Laboratories (UL) has issued a Blue Card (equivalent to the well-known Yellow Card) specifically dedicated to 3D printing materials to PA 2210 FR: at wall thicknesses above 3 mm, it meets the...

Parts made from pigment free polyamide 12 powder are also white but appear slightly more transparent. This material can be approved for contact with food and its other properties are similar to PA 2200 – strength, rigidity and good chemical resistance.

The property profile of durable white parts made from PA 2200 is very balanced: such parts are characterized by strength, rigidity and good chemical resistance. They can be biocompatible and certified for contact with foodstuffs. 100% proven quality and 45% less CO2e The petrol-based polymer PA...

Parts made from the mass-dyed polyamide 11 powder have a uniform black color and are therefore particularly suitable for visible areas that are subject to abrasive wear. In addition, they have high impact resistance and elongation at break and do not splinter even under the highest levels of...

The white, light-transmissive, additively manufactured parts are characterized by high impact resistance and elongation at break. They do not splinter even under the highest mechanical loads. Compared to PA 12, they have higher temperature resistance and nearly constant mechanical properties over a...

Built upon decades of industry feedback, the INTEGRA P 450 helps you move from prototyping to serial production. • Achieve unprecedented material flexibility, realize new opportunities for innovation, and embrace possibilities to optimize and develop new materials. • The P 450 delivers...

This medium-gray high-performance plastic from the group of polyetherketoneketones (PEKK) consists of 23% carbon fibers encapsulated (compounded) in the round powder grains of the material. By comparison with 3D-printed components, which have dry mixed carbon fibers, the properties of parts made...

This high-performance plastic made from PA 11 features high strength combined with increased impact resistance and elongation at break due to being enforced with carbon fibers. Since the fibers are encapsulated (compounded) in the raw material, the dark gray components have comparable mechanical...

The white flame-retardant polyamide 11 is characterized by high ductility combined with excellent strength, making it particularly suitable for manufacturing components with complex geometries, such as housings and load bearing connecting elements.

The compact and reliable FORMIGA P 110 Velocis system for industrial 3D printing with plastics is known for its outstanding part quality. It is very productive and requires only little floor space. • A build rate of 1.2 I/h with a packing density of 5% • Series Production of small to medium-sized...

The reputable FORMIGA P 110 FDR system is now operating with a one-of-a-kind fine laser beam. This creates extremely stable, delicate parts and ultra-smooth surfaces which enables new fields of application. • One-of-a-kind fine laser beam • Produce filigree parts and ultra-smooth surfaces to open...

The parts made from this white material are extremely hydrolysis-resistant, with high resilience and good tribological properties. The degree of flexibility can be influenced by the part design and the choice of process parameters and can even be varied within the same part.

SLS printer for plastics with two lasers and the largest build area on the market. Perfectly suited for the additive manufacturing of large parts with high throughput. • Build rate of 5.6 I/h with a packing density of 5% • Largest build area available on the market • System equipped with 2...

The EOS P 396 is a 3D printer in the medium build volume range for plastic additive manufacturing. A highly productive system integratable into IIoT environments. • Build rate of 3 I/h with a packing density of 5% • Widest portfolio of materials on the market • Most homogeneous part properties...

This metallic gray, aluminum-filled polyamide 12 powder is characterized by high rigidity, a metallic appearance and a range of useful post-processing options. The surfaces of Alumide parts can very easily be finished by grinding, polishing or coating. The chip-breaking effect of the aluminum...