Flow Analysis, Optimization and Development Support
Go beyond validation to achieve true part optimization with fill, pack, cool and warp analyses. Mold Hotrunner Solutions® helps you get perfect parts from the start by simulating the injection molding process in the design phase of your project. You can improve your mold's performance and avoid... Read more »
Flow Wrap
Multifilm offers a wide variety of heat-seal flow wraps for the confectionery market, from the most economical single web OPP films to sophisticated laminates for your most demanding applications. In addition to standard stock materials, we also offer proprietary, high-speed, high-barrier films... Read more »
Fluid Coolers
The Hydra Hybrid Fluid Cooler is designed to remove waste heat from plastics and industrial processes, including hydraulics, feed throats, molds and material. A great alternative to conventional cooling towers. Water & Energy conservation is achieved by using ambient air to cool process water for... Read more »
Fluid Delivery Heaters
Watlow® innovative fluid delivery heaters produce consistent results by reducing temperature and viscosity variations. Watlow's syringe heater was developed for the needs of medical injection applications. The special design provides a heated fluid and drug delivery system solution with long... Read more »
Fluidized Bed Mixer
This 5 cu ft (142 liter) capacity Fluidized Bed Mixer model MF-5-SS gently mixes low- to medium-density bulk materials, including liquid additions, in 10 seconds to two minutes, with 30 seconds typical. Unlike ribbon, paddle and plow blenders with a single shaft turning agitator blades slowly... Read more »
Fluidized Bed Mixers
The Munson Fluidized Bed Mixer is a machine of extremes, offering unique benefits within a narrow range of applications in which its limitations are not a factor. It is among the fastest of all mixers, with cycle times of 10 seconds to two minutes, with one minute typical, yielding a ~5% CV... Read more »
Fluorinated Polymers For Lubricants
Our micronized polytetrafluoroethylene (PTFE) additives are optimized to enable lubricants to perform their best even the most demanding circumstances. They are ideal in applications ranging from critical maintenance to automotive, aerospace and military applications. Read more »
FluoroEtch
Since 1958, Acton Technologies has helped thousands of customers worldwide with the process of making fluoropolymers bondable to other materials or to themselves. The technique is rather simple when you follow our recommended procedures. Do you want to do your own etching? Perhaps you don't... Read more »
Fluoropolymer Extrusion
The plastic sheet extrusion manufacturing capabilities of HB Dynamics for all plastics end markets includes Fluoropolymer Extrusion, for sheet and film. In addition to fluoropolymers, the company also has the capabilities to manufacture film and sheet from many other engineering thermoplastics, as... Read more »
Fluoropolymer Gear Pump
PSI Fluoropolymer Gear Pumps (FGP) are engineered to meet the unique processing demands of fluorinated polymers, such as FEP, ETFE, PTFE, PFA, PVDF. Manufactured from a nickel-chromium superalloy, FGP gear pumps possess excellent mechanical strength at high temperatures and are highly resistant to... Read more »
Flushing & Cleaning
AMSOIL Industrial flushing and cleaning products help remove contaminants from gearboxes and prepare applications for new oil. They’re a vital part of an effective maintenance program. Read more »
Flywheel Cutting Systems
Flywheel cutters are used for high speed cutting of materials to short lengths. Typical applications are washers, spacers, gaskets, and nozzles. Systems use the energy of a heavy duty, rotating flywheel to cut at speeds up to 1,500 cuts per minute with a single knife. Flywheels are available with... Read more »
FMI's Comprehensive Syndicated Business Intelligence Reports
FMI's syndicated market intelligence reports provide a comprehensive analysis on an industry and categories. These thoroughly researched and compiled research reports offer you a deeper understanding of the key factors at play in our industry. FMI's syndicated market research studies are compiled... Read more »
Foam Extruders and Foam Extrusion Systems
Commodore EPS foam extrusion systems are designed especially for the production of Expanded Polystyrene (EPS) foam sheet. We start with the highest quality iron, built in the USA by Davis-Standard. Next, we engineer and build the extrusion system to stand up to the rigors of 24/7 operations. Our... Read more »
Foam Grips
Made from a variety of proprietary foam formulas, GripWorks’ line of foam grips contains the solution for almost any hand grip application. Styles range from standard foam bicycle grips to extruded foam grips for rake handles and other long handled tools. Materials also come in a wide variety of... Read more »
Foam injection molded Spa Pillow by Foam Creations Made in North America
Foam Creations Spas pillons are the highest quality on the market. 100 % waterproof and chemical resistant. Available in different colors, with suction cups or attachment snap pins. We can also create your own pillow design. Read more »
Foam Thermoformers
Commodore foam thermoformers are specifically designed to produce expanded polystyrene (EPS) foam trays, plates, and hinge lid containers at the lowest possible cost. The machines are easy to operate, and thanks to the lack of proprietary components, inexpensive to maintain. All of the features of... Read more »
Foaming Agents ( Endo and Exothermic)
Highly loaded products allowing lower usage and more cost effective total coloring cost. IR pigment systems providing lower heat absorption in outdoor applications enabling wider color selections for outdoor products. Anti-microbial additives formulated into the color. Read more »
Foam-In-Place Gasketing
As a full-service custom molder, Falcon Plastics is one of few molders that offer customers formed in place foam gasket technology (FIPG and FIPFG). This is a foam-in-place technology that forms superior, cut resistant gaskets for electrical enclosures, industrial lighting, and other applications... Read more »
Food and Beverage
An outstanding industry report on Food and Beverage that will help you to increase your business by 10x Read more »
Food Packaging
LINDAR is a manufacturer of various plastic food packaging solutions. From bakery containers and produce clamshells to deli and meat packaging, our containers can be specifically developed to precisely fit your products and displays. At LINDAR our food packaging containers can be made from various... Read more »
Food Packaging
Our strict quality control standards and AIB Compliance make us an ideal choice for your consumer food packaging requirements. We are capable of producing large volume, thin or thick gauge food packaging products (clam shells, shipping trays, POP display trays, etc.) from a broad range of food... Read more »
Food Service Bags & Supplies
Food Service products provide unmatched performance and value in flexible food packaging. From commercial kitchens to fast food, Inteplast has a product that will exceed your expectations. Inteplast, the professional’s choice Chefs to caterers use our products for all their needs. We have a... Read more »
Force Measurement Test Stands
ANDILOG manufactures a complete line of force test stands. These systems are used to accurately measure compression, tension or torque forces, on springs, wires, components, bottles, food products, etc. Test stands can be manual or motorized, single or dual column. ANDILOG produces quality test... Read more »
FORMABLE COIL HEATERS
Formable coil heaters Up to 8W/cm² Sections : round, square, rectangular Read more »
FORMIGA P 110 FDR
The reputable FORMIGA P 110 FDR system is now operating with a one-of-a-kind fine laser beam. This creates extremely stable, delicate parts and ultra-smooth surfaces which enables new fields of application. • One-of-a-kind fine laser beam • Produce filigree parts and ultra-smooth surfaces to open... Read more »
FORMIGA P 110 Velocis
The compact and reliable FORMIGA P 110 Velocis system for industrial 3D printing with plastics is known for its outstanding part quality. It is very productive and requires only little floor space. • A build rate of 1.2 I/h with a packing density of 5% • Series Production of small to medium-sized... Read more »
Forming and Punch: TR Models
The Tr model is a continuous cycle thermoforming machine designed for negative molding production. Forming and peripheral punching trim is made in one station. The TR model is ideal for cups and plates production runs. Built with an oversize steel welded structure, this series is designed for... Read more »
ForTii®
As part of the Stanyl® family, ForTii™ is a new high temperature polyamide that extends the portfolio for high performance engineering thermoplastics. It offers a unique balance of properties including excellent dimensional stability, compatibility with lead free soldering, high stiffness and... Read more »
Fortron® polyphenylene sulfide (PPS)
Fortron is a high-temperature linear PPS that offers excellent dimensional stability, inherent flame resistance, and excellent chemical and solvent resistance. PPS is insoluble in all known solvents below 200°C (392° F). It also shows tremendous stability in both typical and alternative automotive... Read more »
Fortune ES (Energy Saving) series
# Energy saving --- Almost equivalent to all electric molding machines. # Quick response --- Injection response time (Standard mode) # Stability in low-velocity/low-pressure & wide range --- Injection velocity: From ultra-low to high velocity range # Linearity --- Excellent linearity in both... Read more »
Fortune Va series
Energy Saving From Vα All-Electric 1. All-electric machines dramatically reduce operating costs, using 50 - 80 percent less power than equivalent hydraulic machines. Connected power requirements for an electric mactine are 30% those of a hydraulic machine. Furthermore factory equipment cost is... Read more »
Fortune Ve series
Basic hydraulic toggle design with V-7000 controller. Range from 110 ton to 280 ton. Read more »
Fortune Vr series
Victor Taichung introduces to you, the new VR series of Plastic Injection Molding machinery. With a tonnage of 350-850 tons and using the advanced V-8000C controller and semi-closed looped hydraulic system, the new VR-range can match your requirements of quality, high-speed production and precision... Read more »
Fortune Vs series
Standard toggle designed Injection Molding Machinery with the range from 50 to 250 tons. Designed for your universal processing applications, this series of machinery is fast, accurate and has excellent repeatability. With two controllers to choose from and standard proportional a flow control,... Read more »
FP-2255 Friction/Peel Tester
Thwing-Albert's FP-2255 COF Tester (Coefficient of Friction Tester) / Peel Tester provides more information with less keystrokes and offers five languages standard on all instruments. It also provides the ability to create, save, and password protect test set ups. The COF test mode can be... Read more »
FPRS-80-SBO
The 80 SBO is designed for reservoirs up to 2800 gallons, and uses similar components as other ASL Systems. Standing 46" tall, 40" wide, and 15" deep, the 80-SBO units weigh 300 lbs. and, like other ASL systems, provide up to one year of 24/7 operation without operator intervention or maintenance. Read more »
FPRS-E30 Cabinet & FPRS-E40 Cabinet
The E-Series Cabinet Units provide the "best bang" for the buck, of any off-line fluid filtration System, period. These "no frills" systems are sized to handle reservoirs in the 1300 gallon and smaller range. Operating on 120VAC, 50 or 60 Hz, single phase power, these systems draw less than 10... Read more »
FPRS-S200
The FPRS-S200 is designed for larger (up to 7000 gallon) reservoirs, and uses similar components as other ASL Systems. Standing 36" tall, 36" wide, and 36" deep, the FPRS-S200 units weigh 650 lbs. and, like other ASL systems, provide up to one year of 24/7 operation without operator intervention or... Read more »
FPRS-S30 Cabinet & FPRS-S40 Cabinet
The "S" Series Cabinet Units add several maintenance and operation features to the already proven E-Series Systems. Automatic back-flush warning, over pressure shutdown, Low voltage shutdown, internal drip tray with float switch shutdown, and remote alarm provisions. Featuring easy to operate and... Read more »
FR 106
The white flame-retardant polyamide 11 is characterized by high ductility combined with excellent strength, making it particularly suitable for manufacturing components with complex geometries, such as housings and load bearing connecting elements. Read more »
FRA: High-End Take-out Robots
Robots that have the future interests of the molding industry in mind It used to be a dream that vast numbers of people could use the same product and similarly enjoy the same benefits. Then, plastic engineering miraculously made that happen. Since the advent of injection molding, industry has... Read more »
Frame Packs & Gaskets
Frame packs provide an aluminum or stainless steel binder that acts as a seal around the outside diameter of the screen pack and breaker plate. We offer a multitude of mesh combinations to insure optimal efficiency. Read more »
Friction Washer
Our Friction Washer is used to pre-clean plastics during a fully integrated washing line process. We utilize auger type screws to mix and convey material while adding water via internal spray tubing. Our Friction Washer has a significant area of screen for water/contaminants discharge. We offer... Read more »
Friction Washers FW Series
The NEUE HERBOLD friction washer FW Series is used to intensively wash plastic materials such as film flakes, granulate to include PET bottle flake and other types of rigid plastics. Read more »
From Idea to Superior Consumer Packaging
Being first to the marketplace means having an efficient supply-chain that shortens the timeframe from “Idea to Superior Consumer Packaging.” To shorten the supply-chain, Creative Blow Mold Tooling focuses on the initial package design. Our team of 5 full-time design engineers provides us with the... Read more »
F-Style, 2.5 Gallons
Available in the following options: Color Neck Finish (mm) White 63 Natural 63 White 38 Read more »
Fuel Cells
TIMREX® graphite powders are used in the production of plastic/resin molded or pressed bipolar plates, to ensure the necessary electrical and thermal conductivity. For metallic bipolar plates, TIMREX® graphite dispersions are the optimal coating to prevent corrosion. In gas diffusion layers, the... Read more »
Fuel Tanks
Blow molded fuel tanks for you off-road vehicle. Multi-layer for gasoline and mono layer for diesel applications. Engineering and design support from concept to production. Read more »
Fulfillment
Ensure that your product is delivered quickly and at the lowest cost possible. USA Injection Molding’s dedicated customer service and sales teams provide individual attention and care throughout the ordering and fulfillment processes. We offer bulk distribution and individual order fulfillment... Read more »
