Injection Molding Service(Injection Molded Parts)
Cooperated with some injection molding factories equipped with various molding machines for many years，Tip-Top is capable of finishing the injection molding at those molding factories and then produce high-quality plastic injection molded parts for its customers. Here are some molding services... Read more »
Injection Molding Services
Da/Pro Rubber's injection molding services include both plastic injection and liquid silicone rubber ( LSR ) injection molding. Plastic injection molding involves a thermoplastic process where the raw material in pellet form is heated then pushed through a heated barrel where it is melted. The... Read more »
Injection molding services
APM was founded as an injection molder and molding continues to be the cornerstone of our business. We are constantly upgrading our equipment and, through the use of state-of-the-art, closed-loop Cincinnati Milacron molding machines, we have achieved part repeatability and quality. A high degree... Read more »
Injection Molding Silicone
Da/Pro Rubber offers Liquid Silicone Injection Molding ( LIM ) services in addition to our compression / transfer molding services. Da/Pro is known for high precision, close tolerance molding services and manufactures silicone injection molding parts to these same demanding standards. Liquid... Read more »
Injection Molding
The injection molding process is the most common, most important and economical process for the mass production of plastics, especially high performance engineering plastics. We offer rapid tooling (prototype tooling), trial tooling ( bridge tooling ), hardened tooling, low volume production,... Read more »
Injection Molds
Injection Molds We specialize in insert molds and highly polished molds such as headlamp, tailamp, and metallized automotive products, as well as industrial and appliance. We also have 7x10 and 5x8 mud units for your molds inserts to compete with Protolabs We offer a three step path to your... Read more »
Injection Molds for Liquid Silicone Rubber
M.R. Mold and Engineering is one of the few companies in the United States offering waste-free LSR molds. Waste-free molds coupled with various types of automation devices, such as M.R. Mold's Cold Runner System, provide our customers with 'lights-out' molding. M.R. Mold's liquid silicone molds... Read more »
Injection mould
Injection Mold -Engineering plastics molds making -Plastic logo molds making -ABS + Chromed plating logo making -High gloss polishing molds making -Semi-product assembly -Semi-product painting & coating - Customer design service. - Prototyping. - Mold making. - Manufacturing process... Read more »
Injection Moulding
With Omega Plastics, the capacity of injection moulding ranges between 30 and 350 tonnes. Omega Plastics can also manufacture tooling in Aluminium, P20 or hull hardened H13 and can be either hand-loaded or fully-automated, depending on the quantity and time restraints of your order. Read more »
Injection moulding of parts of great dimensions
Thermoplay SpA has developed a new hot runner system for the moulding of parts of great dimensions like bumper, spoiler, porter, for the auto bodies of car and truck, but also large parts of household-electric, pallet for the packing sector. In this type of applications the use of sequential... Read more »
Injection Stretch Blow Molding
The clarity and functionality of PET (polyethylene terephthalate) containers make them ideal for packaging applications in all markets. Pretium Packaging has injection stretch blow molding (ISBM) capabilities across North America. We employ both single-stage and two-stage molding machines so the... Read more »
Injection Stretch Blow Molding Machine
The Aeon Models of Injection Stretch Moulding Machines have been designed to produce a wide range of PET containers in a single stage. The Aeon machine produces the preform, conditions the preform and blows the bottle in a single machine. Electric Drive for Screw Rotation Hydraulic System by... Read more »
Injection Stretch Blow Molding of PET
Poly-Tainer has made significant investments in single stage preform molds and stock containers to help fuel this segment. From low output mold options which minimize customer investment to high cavitation platforms designed for large volume demand, Poly-Tainer is well positioned to help your brand... Read more »
Injection-Molded Pharmaceutical Medical Devices
HTI Plastics is an FDA registered, ISO 13485:2016, and ISO 9001:2015 certified contract manufacturer specializing in injection molded Class I and Class II pharmaceutical medical devices. From product design/prototyping to clean room packaging, HTI is your complete resource for contract... Read more »
Injection-Stretch Blow Molds
Compact designs and manufactures blow molds for re-heat ISBM machines and complete injection, conditioning, blow and eject tooling for one-stage ISBM machines to mold containers ranging from 10ml to 20 liters. Read more »
Injector blade 642K 38x8x0.25mm – Ceramic coated, 100pcs
Injector blade 642K 0.25mm with ceramic coating for plastic film production Ceramic coated injector blade in stainless steel for plastic film manufacturing. The fine structure enables the coating to protect the edge as long as possible. Ceramic coating is therefore advantageously used to cut white... Read more »
INJECTOR VALVE
The range of applications for dosing valves are mainly in the extrusion area. With this specific valve different additives and auxiliary materials can be purposefully inoculated into the plastic at a defined place. Both solid and fluidic materials can be added. The connection dimensions are... Read more »
Ink Rub Testers
The Ink Rub Tester is designed to determine the quality of adhesion, and scuff resistance of ink to paper surfaces, plastic and aluminium film. The motorised unit is simple to operate by entering the number of rubs in the pre-set counter and starting the unit. It will rub the sample until the... Read more »
In-Line Conveyor Thermal Press (SMEMA)
The SMEMA Conveyor-based Thermal Press Systems feature our H-Series Thermal Press machines integrated with the SMEMA standard to allow for a completely scalable solution for the rapid implementation of new equipment into existing SMEMA-compliant work cells. The SMEMA Conveyor H-Series accommodate... Read more »
In-line Filter
The In-Line Filter (ILF) is a convenient, low-cost side-access melt filter for batch runs. Screen changes can be accomplished in as little as five minutes and do not require line disassembly. Used in a broad range of applications including filtration for gels in film and small carbon particulate... Read more »
In-line Plastic Injection Molding
In-line Plastic Injection Molding PlastiComp provides a full portfolio of thermoplastic composite technologies. Pushtrusion® direct in-line compounding technology and equipment, together with Complet, long fiber reinforced thermoplastic pellets provide a systems choice to customers that is unique... Read more »
Inline Pressure Thermoformer
The Zed model SC series thermoformers are inline pressure formers that combine preheat, pressure forming, and trimming. The SC series produces packages for clamshells, medical trays, blisters, plastic food containers, pharmaceuticals, and horticultural containers along with a variety of other... Read more »
Inline Saw TRS for PVC
Planetary saws for cutting and chamfering rigid ABS, PVC, PE and PP pipes. Available models for product OD range from 10mm to 2000 mm (0.630" to 78"). Read more »
Inline Thermoformers
Inline Thermoformers Read more »
In-Mold Electronic Technology
Meet the perfect union of form and function. One that combines an innovative, more stretchable material with dramatic advancements in electronic ink to give interface designers new creative freedom, without any compromise in meeting functional switching needs. And because these new electronic inks... Read more »
Inner Liner Trimmers
Liner Trimmers are used to trim the scrap section of the inner wall of the pipe out of an integral bell (coupler formed on a corrugator). We offer a range of automatic and semi-automatic machines that can accommodate 100 mm to 1500 mm diameter pipe. These units use a knife to perform the trimming... Read more »
Inno-Lok
Polymer Packaging, Inc. is an officially-licensed Inno-Lok® converter. All of your form, fill, and seal products can be packaged in our re-closeable zipper packaging in six weeks or less! Inno-Lok® pre-zippered films will run on all vertical or horizontal form, fill, and seal machinery. There is no... Read more »
In-Plant Document Destruction Systems (DDS)
Our Document Destruction Systems have been engineered to fit into your existing facility using a modular design philosophy. They are engineered to integrate seamlessly with your Mobile Shredding and Collection Trucks. Our innovative and patent pending Securistak systems are offered on both the... Read more »
Inplex Plastic Extrusion Coating Services
Inplex can coat continuous lengths of your flexible tubing, wire or metal bars. Contact the company to learn more about the plastic extrusion coating services offered. Read more »
Insert Molding
ICOMold can insert metal, ceramic or plastic pieces into molten thermoplastic. The inserts can be threaded or other attachments to join custom parts to one another. Insert molding can reduce cost by embedding secondary plastic parts into the molding process, as opposed to installing the inserts... Read more »
Insert Molding
With machine tonnage ranges from 35 ton to 730 tons, Noble has the ability to produce small run prototyping to large scale production runs, 1 million plus pieces. RJG’s E-Dart systems and IQMS’s real time modules are implemented in all our presses allowing advanced scientific molding techniques... Read more »
Insert Molding
The Insert Molding Advantage - Automation Experts - 47 Years Service - Minority Owned - Lean Manufacturing - Presses from 30 to 400 Ton - Design & Prototype Insert molding is an important process for the production of a wide variety of parts and assemblies. Inserts are made of many different... Read more »
Insert Molding
Insert Molding Services Plastic Molding Manufacturing offers advanced insert molding services designed to enhance product functionality, reduce production costs, and streamline complex assemblies. Insert molding is a process where thermoplastic resin is molded around pre-placed components—such as... Read more »
Insert Molding & In-Mold Labeling (IML)
Insert Molding and In-Mold Labeling are two of the most difficult tasks for either an operator or an EOAT to perform. Insert Molding is the process of placing small parts into a mold that then become part of the finished product. The robot must be able to assure proper placement and alignment of... Read more »
Insert Molding Machines
MADE IN USA Vertical rotary table design. Up to 12 different molds running on the same table. Approx 7' x 7' foot print. Up to 2oz shot size. 25 ton clamp. Eurotherm touch screen. Read more »
Insert Molding Service
Make Strong, Functional Prototypes and Production Parts With Insert Molding Xometry offers insert molding as part of its injection molding capabilities. For a free insert molding design review and quote, upload your CAD files here. Our expert team of injection molders will get back to you within... Read more »
InSite® Canvas
InSite Canvas is a cost effective extruded styrene faux-canvas foamboard with a bright-white embossed textured finish, which is part of the ColorOne™ system. It features the same InSite Reveal proprietary foam center as all InSite products and is ideal for digital printing, screen printing, POP... Read more »
Inspection Table/Station
HFA's Inspection Stations are custom built to the specifications of the application. The table surface ranges from stainless steel to UHMW or laminate, and the sizes range from 2' x 2' up to 10' x 5'....Available options include overhead lighting, under-surface lighting, outlets, dry-erase boards,... Read more »
Inspection Tables
Inspection Tables are generally used to provide a work surface to complete an inspection or assembly process. The units are constructed of a steel or an extruded aluminum frame structure. Steel structures feature an adjustable height work surface. The work surface features a perimeter rail.... Read more »
Inspector - PIM60 vision sensor
The Inspector PIM-series provides high-speed positioning, inspection and measurement. Its multi-functional vision toolbox solves a wide range of quality control applications and improves production efficiency. The PIM-series combines smart camera functionality with the ease of use of a vision... Read more »
Installation Tooling for Thread Inserts - ElecArm®
The all new installation equipment for installing Tappex self-threading inserts (Triserts/Foamserts/Trisert-3s). The ElecArm® utilises a robust vertical support column, horizontal-sliding balance arm with spring support and fitted with an electrically powered torque-settable screwdriver. The... Read more »
Instant Online Quotes for Plastic Injection Molding
ICOMold offers the only instant quotations in the plastic injection molding industry. Simply upload your CAD models, specify your plastic material, quantity and other options, and within 30 seconds you will get your mold cost and piece price. The online quote system is also interactive – you can... Read more »
Insul-Vest Blankets
Take advantage of Insul-Vest's many years of experience in many industries to insulate your machine or application to save energy, improve worker environment and improve safety and product consistency. Read more »
Insul-Watt™ Heaters
This newly patented energy saving product is made of vacuum cast insulation material, utilizes infrared heat, and incorporates a unique cooling system that allows heat drawn from the barrel to be used elsewhere in the plant. This new heater is made entirely of electrically non-conductive vacuum... Read more »
INTEGRA P 450
Built upon decades of industry feedback, the INTEGRA P 450 helps you move from prototyping to serial production. • Achieve unprecedented material flexibility, realize new opportunities for innovation, and embrace possibilities to optimize and develop new materials. • The P 450 delivers... Read more »
Intelligent Ingredient System (I2)
When producing food for people or pets, protecting your product, process and personnel are of the utmost importance. Today, recipes contain a larger number of specialized ingredients, have various formulations and require ingredient lot tracking for GFSI and FSMA compliance that require producers... Read more »
Intensive Washer IW Series
Neue Herbold - Intensive Cleaner IW Series is a downstream unit for intensive cleaning of hard plastics and films. Technique The pre-washed material is intensively washed; while passing the machine, it is thrown against the screen by centrifugal forces. Various screens determine the cleaning... Read more »
Internal Bubble Cooling
The latest 3rd Generation Internal Bubble Cooling system from D.R. Joseph can improve production rates by 15 – 40% when adding IBC to a blown film line, and offers 8 – 15% improvement in production over competing IBC systems on the market. Rate and layflat tolerance (+/- 2 mm) improvements are... Read more »
Internal Bubble Cooling- IBC
This patented IBC control system is 100% digital making it very reliable in the toughest plant environments because interferences with other electrical devices are eliminated. The tightest possible layflat control is achieved when equipped with the high-speed valve. Due to the patented dual... Read more »
Internal Bubble Cooling Systems
4 + 1 Pancake style internal air distribution system: cast aluminum assembly with four high velocity jets which impinge on the bubble at graduated levels for efficient cooling. A fifth jet directs air towards the die lip exit to precool the melt Read more »
