D155 Density/Specific Gravity Meter
For Measuring Density, Specific Gravity and API Degrees ASTM D1250, ASTM D1298, ASTM D4052, ASTM D7777 The automated CANNON D155 offers a low-cost, affordable alternative to manual hydrometer methods for measuring density and specific gravity with easy, one button operation. Built-in thermal... Read more »
DAC Mold Sprays and Process Aids
For over thirty years, DAC Industries has developed and manufactured a line of Injection Molding Maintenance Aerosol Products, and Industrial Water Treatment Programs. DAC Industries serves the Plastic Injection Molding, Die Casting and Textile Industries, as well as related manufacturing. DAC... Read more »
DAC-101 Moisture Guard
DAC-101 Moisture Guard is a distinctive formulation that was developed to maximize performance in short and long term moisture displacement and rust prevention situations. We are all well aware of the cost involved by rejected parts due to marking. This is typically caused by... Read more »
DAC-102 On Line Mold Cleaner and Resin Remover
DAC-102 is the most advanced, carefully blended CFC free solvent aerosol created for the use of resin removal and mold cleaning, and allows for the fast and efficient removal of polycarbonates and polystyrenes. The special formula will soften hard plastics such as nylon and delrin... Read more »
DAC-103 Universal All Purpose Degreaser
DAC-103 is much more than just a degreaser. Universal All Purpose Degreaser provides professional users with excellent grease and oil removal, plastic build-up removal, and rust inhibitor removal. The adjustable spray nozzle allows users to select flow levels that fit their application.... Read more »
DAC-104 All Purpose Foam
DAC Industries All Purpose Foam is an NSF registered citrus-scented foam cleaner that sticks to surfaces to extend contact time to break down oils, buildups, rust, and stains. Read more »
DAC-15151 All Purpose Mold Release
This non-silicone, fully paintable release contains lecithins, unlike some food-grade silicone. The DAC All Purpose Mold Release principle is approved as a direct food additive. This universal mold release may safely be used on all thermoplastics, including polycarbonates, styrenes,... Read more »
DAC-206 Wear Guard 2000
Wear Guard 2000 is an anti-wear and lubrication package for medium temperature molding requirements. Wear Guard 2000 eliminates the high cost of expensive plating agents. Wear Guard 2000 Should be used on all moving parts, slides, cams, and pins where galling may occur. Read more »
Dart Drop Impact Tester
Thwing-Albert the dart drop tester is an easy-to-use, ergonomically designed instrument used to measure the impact resistance of plastic film, coated paper and other materials utilizing the free falling dart method. ASTM D1709 - Method A Dart 38.1 mm diameter Drop height .66 m (26 in) Dimensions... Read more »
Datacolor Colibri ColorMatch
Colibri ColorMatch software leverages multiflux technology in its advanced color and opacity matching algorithm, resulting in higher first-time match rates, fewer correction steps, and optimized pigment load, saving you both time and cost. Highly efficient matching leveraging multiflux technology... Read more »
Datacolor P300 Portable Spectrophotometer
Get accurate color measurement wherever your samples are. Digitally capture color with portable color spectrophotometers designed for high accuracy and maximum convenience. Measure and check color on the go, simplify your workflows, and reduce inefficiencies. > Unmatched Quality and Precision:... Read more »
DataPro: Process Control & Data Management Systems
Beta LaserMike’s DataPro controller series, when coupled with dimensional measurement instrumentation and a versatile set of I/O capabilities, enable you to produce superior quality products by providing all the information and control capability you need to keep your production process running... Read more »
Decking
Plastibec Deck Cover is a brand new exterior line. Imagine a new life for your deck! Plastibec’s resurfacing deck cover offers a cost effective solution: Extend the life of your deck with our patented deck cover system and enjoy years of low maintenance while extending the life of your deck... Read more »
Deco Tech custom printing & decorating services
At Deco Tech we provide custom decorating and printing services for companies that don't want to bring pad printing, screen printing, digital printing, hot stamping and heat transfer decal printing in-house. We do all the work for you in a timely manner (1 to 2 weeks typical turn-around) with the... Read more »
deCON
Decontamination dryer for production of food grade flakes or skeleton waste directly in front of a production extruder. Read more »
deCON 20
The smart decontamination module designed to process different types of material even at the same time. The deCON 20 is designed to process different types of material at the same time, e.g. PCR pellets, PCR bottle flakes, or in-house skeleton waste. The material is predryed, dedusted, and... Read more »
Decorated Pieces
Our decorating capabilities include hot stamping, heat transfer, silk screening and pad printing. Our in house art department gives you the support you need when producing copy for your products. Read more »
Decorating
From Heat Transfer and In-Mold Labeling to Hot Stamping, Falcon will meet your requirements for specific colors and formulations to fulfill your decorating needs. Falcon has the decorating capabilities to help our customers differentiate their products while creating a more economical manufacturing... Read more »
Decorating, painting, plating, printing services
Decoration services include pad printing, hot stamping, painting, plating, silk screening, RFI shielding, and hydro-graphics. Read more »
Decorative coatings
In order to enhance the visual appeal of your products, we carry numerous coating materials to meet all your aesthetic needs. They include clear and matte varnishes, metallic effect lacquers based on dual-component polyurethane coating materials and customer-specific coatings to create special... Read more »
DECOUPLED Molding
Intended for anyone involved in part design, tool design, or engineering, this four course series teaches the concepts and theories covered within the RJG, Inc. 6-8 hours of Professional Multimedia Training Read more »
Dedusting Solutions
Cleaning bulk solids is important for a number of reasons. Food and pharmaceutical bulk solids are cleaned for hygienic reasons and to improve the quality of the finished, packaged product. Minerals are cleaned primarily to avoid environmental and health problems. The plastics industry cleans... Read more »
Dedusting System
Whether you are using virgin pellets or granulated regrind, dust, fines and contamination can adversely affect your processing and cause rejections. Maybe you need to remove fibers, paper, or other materials from your product. In either case our customized dedusting systems ensure a clean and... Read more »
DEGRADABLE FILMS
NOW Plastics is pleased to announce the introduction of a new degradable polypropylene film. This film is one hundred percent degradable and offer the same strength, clarity, sealablitity and printability as standard BOPP films. Our degradable film has excellent puncture and tear resistance and is... Read more »
DENSIFIER
DENSIFIER Costarelli presents its leading machine the Densifier, an important innovations designed to enhance performance and reduce risks in the work environment New geometry structure - lower and more compact, innovative systems for belt tensioning and water/air entry in the densifying chamber... Read more »
Dental Equipment Housing
Housing thermoformed from 1/4" thick Kydex-T sheet. Read more »
Desiccant Bags
Clariant manufactures a full line of moisture adsorbent bags which consist of strong, yet porous, nonwoven materials such as Dupont Tyvek®, filled with a variety of desiccant types: Desi-Pak® - bentonite clay Sorb-It® - silica gel Tri-Sorb® - molecular sieve Used to protect a variety of... Read more »
Desiccant Canisters and Capsules
Desiccant canisters are small cylindrical containers filled with active agents that can be inserted at high rates of speed into pharmaceutical bottles and have become the gold standard of pharmaceutical desiccants. Their special design allows them to be used in standard insertion equipment and... Read more »
Desiccant Feed & Inserting
Cannister and loose Pouch or sachet desiccant feeding and inserting machines. Built in bulk hoppers, verification and reject systems. simple low speed units and high speed units for 700+ per minute. Read more »
Design
At Hi-Tech Mold & Tool, Inc., we prefer to work in partnership with our customers and their suppliers, uniting the design engineer and the resin supplier with the mold-maker and the processor at the concept stage of the part development cycle. Hi-Tech's ability to anticipate important issues at... Read more »
Design
The design process begins with a full engineering review that combines all aspects of the package: - Protection Requirements - Packaging Process - Point-of-Sale Display Criteria Our design team has a combined 100+ years of thermoforming tool design experience. Using their hands-on knowledge of... Read more »
Design
Hoffer Plastics offers customers engineering design assistance, a dedicated project management team and access to our on-site sampling room. Read more »
Design & Engineering
A quality product comes from a good design. Our experienced team of engineers work with the latest engineering tools and software to help you construct a quality plastic part that also allows our tooling engineers to create the best possible and cost effective mold for your project... Read more »
Design & Prototyping
CP Technologies will work interactively with your in-house and/or outsourced design staff to help insure your project has the best possible appearance, maximum functionality, and optimized manufacturing costs. Our staff can review design information and part geometry during the design process to... Read more »
Design & Prototyping - Injection Molds
Reverse Engineering is done for many customers. We Design Using the NextEngine 3D Scanner.We 3D Print with many machines including our Formlabs Form2 and other FDM 3d printers in house and outsource our metal 3D printing until we can afford a machine. The NextEngine 3D Scanner captures objects in... Read more »
Design Aid Seminar
Design Seminar Decades of working with our customers and prospects to improve and enhance their designs, revealed a need to provide a comprehensive design clinic to help companies achieve more robust designs, eliminate costly design errors, and avoid delays in production launches. We like to help... Read more »
Design and Engineering
Design for Manufacturability (DFM) – Custom Mold & Design’s team of engineers are readily available to work with your team to provide best-in-class component design support. We begin this process by understanding your product requirements and how this information translates into appropriate part... Read more »
Design Capabilities
Selmax offers technical consultation at the earliest stages of product design. We work closely with our customers on to define the requirements of the finished product - physical dimensions, structural supports, custom engraving, texture and finishing With our Computer Aided Design (CAD) to we can... Read more »
Design Engineer Package
This package combines twenty courses from the Part Design Series and the Mold Design and Moldmaking Series as well as our injection molding library to create this popular technical training package. 23-37 hours of Professional Multimedia Training with Study Guides Read more »
Design Engineering Services
For your custom designs, PolyFlex Products offers full-service 3D modeling. The 3D model of your design gives you an early preview of your product. If necessary, alterations can be made to your specifications before tooling has been produced. Through these designs, we create custom solutions to... Read more »
Design for Manufacturability
Many projects have come to us without the ability to manufacture the product the way the customer had intended. Largely due to the customers lack of knowledge in the manufacturing processes when it come the plastic injection molded. Several projects have been renewed when it was discovered by our... Read more »
Design for Manufacturability (DFM)
Our plastics and liquid silicone rubber (LSR) engineering expertise elevates the performance of parts and end-products with recommendations for optimum moldability. We can help you deliver repeatable results with new product introductions by testing rapid prototype tooling prior to production. Our... Read more »
Design Service
PTI Design is an independent, full-service design and development studio delivering progressive and innovative design with state-of-the-art technology. Whether injecting creativity into a current project or spearheading an entirely new production, PTI Design can seamlessly provide the path from... Read more »
Design, Engineering and Tooling
We encompass all the capabilities needed to design and build tooling for parts in a wide variety of sizes and materials. Add Accent’s tool maintenance to the formula, and the package becomes complete. Read more »
Design, Prototyping, R&D Services for Blow Molding
Custom-Pak is one of the world’s largest blow-molded parts manufacturers and a leader in advanced blow-molding technology. Our Integrated design facilities allow us to design, test and manufacture your product faster and less expensively than many companies can develop a prototype. We offer true... Read more »
Designer
Moldex3D Designer software develops a complete series of powerful pre-processing tools, including the automatic mesh generator and intelligent modeling wizards, to help users create True 3D mesh models efficiently and setup a variety of simulation conditions easily, such as gates, runners, cooling... Read more »
Dessert Cups
Winpak's Dessert cups are round thermoformed containers with flat lips. Dessert cups are used for various dessert products such as applesauce, pudding, and ice cream. They are designed to be run on high-speed fill/seal packaging machines. Read more »
Dew Point Transmitter Model HDT
Xentaur HDT The Model HDT Dew Point Meter uses a Xentaur HTF™ high capacitance aluminum oxide sensor with a measuring range of -100ºC to +20ºF or -60ºC to +20ºC. Customers can also request special ranges for special applications. The Xentaur dew point sensors provide a high degree of accuracy,... Read more »
DFM ANALYSIS
The Design for Manufacturing Analysis or DFM Analysis is a free service before mold design. Our experienced engineers will review the feasibility of your part for injection molding, we will review your part for proper draft, gate location, feature sizes, under-cuts, wall thickness, and sink. Our... Read more »
DFM Support
New Berlin Plastics strives to set itself apart through providing effective and efficient design support before tool development occurs. We will go the extra mile to ensure excess cost and failure modes are designed out early. This is evidenced in the case study abstract below. Visit the link for... Read more »
