Screws and Barrels
GTS (German TwinscrewS) has over 25 years experience in designing and manufacturing different type of Screws for a vast variety of products such as pipe, profile, sheet and pellets. We deliver large single screws and almost any size of twin screws up to diameter of 500 mm. We guarantee to deliver... Read more »
SDI-5
This large dual-hose low pressure, pneumatic blasting system utilizes dry ice block, pellets or nuggets assuring flexibility and versatility in providing a wide range of blasting pressures: 40 to 250 psi (2.8 to 17.2 bar). The SDI-5 dry ice blasting system includes: •One length of low-pressure... Read more »
SE3 Series Compact Rotary Paddle Unit
Small and compact makes this level switch perfect for small hoppers on plastic molding and processing machines. - Range of voltages to choose from - Local LED indication available - Range of probe and paddle styles - Economical Read more »
Seaguar Leisure Products
Fishing fans will be familiar with the Seaguar series - another product developed using Kureha's in-house technology. Because it is made using polyvinylidene fluoride resin, Seaguar stands out among existing fishing lines for its strength, sinking speed and invisibility in water. Kureha's broad... Read more »
Sealing Solutions for the Plastics Industry
Chesterton's sealing solutions are designed to help plastic manufacturers increase reliability, minimize downtime, and maximize productivity. Our seals have been proven to allow faster, more precise, repeatable cycling for higher production runs and extended service life, while reducing... Read more »
Seal-Scan
Seal-Scan® characterizes seals that appear visually acceptable yet possess defects that affect product quality and shelf-life. Seal-Scan systems utilize non-contact airborne ultrasonic technology for seal integrity testing and seal quality analysis of pouches and flexible packaging. Seal-Scan... Read more »
Seal-Sensor
Seal-Sensor™ utilizes ultrasound technology that provides a non-contact pouch seal inspection solution for high speed 100% online applications. Seal-Sensor is a very rapid, reliable method that provides an instant reading of seal presence and quality. Seal-Sensor™ detects incomplete seals, partial... Read more »
Secondary Operations
It doesn't make sense to pay a different company for each step of your manufacturing process, and besides, that approach is way too slow. At LTM Plastics, we handle secondary operations at the press whenever possible. Our thoughtful balance of planning, staff training and automated tools will get... Read more »
Secura® Accurate Weighing System
Secura® makes reliable weighing in regulated areas easier than ever, without time-consuming documentation and monitoring tasks. Besides providing highly accurate weighing results and operating convenience, Secura® also features built-in protection systems for complete reliability and regulatory... Read more »
SEDL-Standards & Engineering Digital Library
ASTM's SEDL is a vast collection of industry-leading standards and related technical engineering information. Read more »
SELDOX
Patented selenium-based antimicrobial compound (masterbatch additive) proven to prevent biofilm formation on the product surface preventing bacteria, viruses and fungus growth. Read more »
Selective Laser Sintering (SLS) Prototypes
Laser-sintering is well known as the technology of choice for ensuring the quickest route from product idea to market launch. Selective Laser Sintering (SLS) is an additive process where layers of powder are deposited, solidified and sintered with a computer-driven laser to form a 3D model.... Read more »
Self Lubricating Mold Bushings
CHOICE GREASELESS BUSHINGS are designed especially for molders who want to run without the necessity to grease their molds, even intermittently. The one-piece solid construction leads to longer bushing life and provides extra support in a guided ejection system. The self lubricating feature... Read more »
Self-Dumping Hoppers
Self-dumping Hoppers are designed to work with a forklift and are dumped by simply pulling a handle. Available in four sizes, from our 5/8 cubic yard to our 2.2 cubic yard unit. Molded plastic bodies are available in a variety of colors and are encompassed by an all-welded steel framework.... Read more »
SelfLube Side Locks
When you need precise alignment and durability look to SelfLube Side Locks. Made of S7 steel to resist shock loading, tin coated for hardness and lubricity. Comes equipped with a large internal radii to reduce stress concentration and provide a more gradual lead in. Read more »
Self-Tapping Threaded Inserts - Trisert®
The Tappex Trisert® range of threaded inserts for plastics has been developed for various environments and application criteria post-mould installed. It includes three primary designs– double ended, reduced headed and headed, all available as normal and close-limit variants; lengths normally stated... Read more »
Sell Scrap Plastic
We purchase all forms of post industrial plastic scrap. Simply give us a call at +1 (843) 410-0326 or submit the form below. A representative will consult with the purchasing department and have a quote to you within a day. Read more »
Sell Used Plastics Equipment
Do you have any machines that are underperforming or idle? Why not turn them into cash? Meadoworks can help you sell used equipment quickly and easily. A global marketing company, we'll help you get top dollar on your equipment by exposing it to more buyers. You control the pricing, and all you pay... Read more »
Sell Your Used Injection Molding Equipment
Elite Machinery Systems can provide you with a current market value for your used injection molding equipment and discuss the steps we can take to facilitate the sale or upgrade of your machines. We currently have over 100 requests for used plastic injection molding machines. Read more »
Semiconductor Testing Equipment
When the leading manufacturer of Automated Test Equipment (ATE) was searching for a custom molded solution, they turned to Ray Products to provide highly cosmetic and functional pressure formed parts to meet their needs. Integrating our custom molded plastic parts with a sheet metal manufacturing... Read more »
Semi-Finished Products
Palram polycarbonate and PVC sheet materials are second to none. Whatever your project, we have a material to fit you needs. Palram's extensive product line has earned the respect of Pro Builders, Architects, Specifiers and Contractors for its unique blend of Strength, Durability, and Good Looks.... Read more »
SENOSAN 2000 series
Bathware/sani-ware applications, multi-layer composite sheet made of ABS co-extruded with high gloss, high chemcial and stress-cracking (ESCR) resistant, PMMA (acrylic) top layer. Products suitiable for shallow, medium and deep draw appliation. . . .Ask about CSA Approval. . . .antimicrobial... Read more »
SENOSAN 3000 Series
Bathware/sani-ware applications, multi-layer composite sheet made of ABS co-extruded with a improved high gloss, high chemical and stress-cracking (ESCR) resistant, PMMA (acrylic) top layer. Suitable for shallow, medium and deep raw applications. . . ask about CSA approval. . . .antimicrobial... Read more »
SENOSAN A50EG Softfeel Matte
Multi-layer compsite with a carrier layer made of high impact ABS co-extruded with a top layer made of matte TPU. The backside of the sheet is produced with an EASYGLIDE layer, for more uniform wall thickness in the thermoforming process. . .interior and exterior products available. . . .key search... Read more »
SENOSAN AM50 Series
Multi-layer composite sheet made of HI (high impact) ABS Co-extruded with a top layer of high gloss, chemical and UV resistant HI & MedI-PMMA (acrylic). Available in solid and Metallic colors custom matched for your application-company colors. Produced with an EASYGLIDE backside layer for more... Read more »
SENOSAN CM61 Series
Multi-layer composite sheet made of high impact, high heat resistant PC/ABS blend. Co-extruded with high impact and UV resistant PMMA (acrylic, produced with an EASYGLIDE backside for more uniform wall thicknesses in the thermoforming process. Available in solid and metallic colors matched to your... Read more »
Sensors - Wire break, Label & Splice, Edge & Level Detection
IBIS Electro-Products Corporation is a global supplier of unique sensors for automation and control. We serve a multitude of markets, including machine automation, industrial control, robotics TCP, cobots, factory automation, machine building, and vehicle and parking gate detection. Our featured... Read more »
Separator Rolls
Frankl & Thomas has been successfully serving the needs of synthetic fiber producers around the world for decades. Our wide range of separator rolls are primarily used for the drawing process, which includes draw twisting, draw texturing and draw winding. Read more »
SEPRENE (SEEPS) TPE
The major application for the Seprene family of products is for the construction industry (industrial boots, etc.) and for the automobile industry. They are also used to replace santoprene, sarlink, tekbond and synprene. The elastomeric base is a hydrogenated isoprene. This compound is compatible... Read more »
Sepro Picker
Not just any Picker ... A Sepro Picker! • Easy adjustment of strokes, take out direction and swing angle. • Safety lock on vertical arm to prevent arm movement during loss of air pressure. • Sprue Gripper with runner verification as standard. A simple, open and safe electronic control •... Read more »
Sepro Robots
We understand that in some circumstances a side entry solution is either not practical or not justifiable. To allow us to provide alternatives for these occasions we are pleased and privileged to be an approved integrator for Sepro robotics. The flexibility of the product range offered by Sepro... Read more »
Serial coating
Before a product gets its serial readiness, it has to pass different tests. To make sure that the raw part meets our strict requirements for drum coating technology; all materials are tested and approved on site by our specialists. Read more »
Serie Mipet Stretch-Blow Moulding Machine
In-line PET preform Stretch-Blow Moulding "two steps" machine (SBM), single cavity. The NEW "all electric" MIPET series machinery assures the best accuracy in the movements, optimizing all the issues involved during the production. It is the fit machinery for who look for high productive... Read more »
Serie MP Extrusion Blow Moulding Machine
The MP series, with single and double work stations, is made up of 7 models. The range covers productive requirements for containers with a volume capacity starting from 5 ml up to maximum of 5 litres. The MP series is distinguished by its consolidated oleodynamic technology (relative to the... Read more »
Serie Torino - Hybrid Injection Molding Machines
The Torino series has been designed to match all the specific needs in the injection molding process, including packaging, electronics, automotive, medical, and more. Capable of processing materials such as ABS, PC, PET, POOM, and others. The hybrid system (servo-drive) allows high response for... Read more »
Series 819 EZ Extrusion Die
The Series 819 EZ, a two stage bolt system with the FeatherTouch™, eases adjustment and enables superior sealing capabilities. With Series 819 EZ system, removal of the die holder is quick, and total cleaning of the body and the diverters is assured. After the thorough cleaning, reassembly is... Read more »
Series CV 500—New Continuous Vulcanization Extrusion Tooling
The new CV 500 Series offers the modular design of the 800 medical series as well as the successful polymer/rubber heads for the highest accruing, improved temperature control, decreased material volume for ultra-precision, plus easier and faster adjustment and cleaning processes of the crosshead... Read more »
Series HWT763AA 75 PSI Heavy Duty Dry Powder Delivery Hose by Alfagomma®
This hose is a 75 PSI rated heavy duty dry powder delivery hose for discharge of dry powders under low pressure. Hose is made using a 3/8" black static conducting NR compound to resist cutting by abrasive materials. It’s reinforced by spiraled high tensile textile cords. The cover is black... Read more »
Series Production Mould
Small Production Runs During the design of this type of mould, all the information and conclusions obtained from the R & D stage are priority, as are results from ant prototype mould which has been constructed. Design and production of the mould using the most suitable types of steel, together... Read more »
Series T519OE Acid – Chemical S & D 240 PSI – UHMWPE – Corrugated Hose by Alfagomma®
This hose is rated at 240 psi for use with suction and transfer service for a variety of chemicals and acids. T519OE will handle 98% of existing chemicals. Also is suitable for use with DEF. The tube is made from transparent UHMWPE (Ultra High Molecular Weight Polyethylene) and is reinforced with... Read more »
SERVICE & REPAIR
K&G Machinery Works provides exceptional services to meet the needs of a variety of manufacturing and packaging companies. The technicians at K&G specialize in exactly the kind of machine services that you need. Whether it’s precision tools, CNC machinery, or your grandfather’s woodworking... Read more »
Service Products
With the D3 descaling unit for water systems, descaling agent REM 93, corrosion inhibitor RK 93 and system cleaner SR 80 for oil circuits, Regloplas offer their customers optimal assistance for maintenance. Systematic Regloplas methods also in service: Descaling of water and steam systems as well... Read more »
Servo Cutting Systems
S1—1" dia. cutting capacity; 1-400 cuts/min; 65 in/lb cutting torque; 1000, 1500 & 2000 RPM blade speeds S2—2" dia. cutting capacity; 1-400 cuts/min; 136 in/lb cutting torque; 750, 1200 & 1500 RPM blade speeds S3—3" dia. cutting capacity; 1-400 cuts/min; 203 in/lb cutting torque; 750, 1200 &... Read more »
ServoBottle
Servobottle for Screen Printing on plastic bottles Servobottle: extremely compact up to 8-colors fully servodriven machine for printing on multi-format plastic and glass bottles. VERSATILITY Stand alone or hooked-up to complete packaging line PRINTING QUALITY: top quality printing on plastic... Read more »
Sevrene TPEs
The Sevrene line of SEBS (Styrene-Ethylene-Butadiene-Styrene) based TPEs combine broad temperature capabilities with excellent weathering properties. These are key requirements for automotive interior applications, sealing systems, and soft touch industrial and consumer components. These TPE... Read more »
Sevrite TPEs
The Sevrite line of SBS (Styrene-Butadiene-Styrene) based TPEs provide the same broad temperature capabilities as the Sevrene TPE line, but in a more cost effective product where strong exterior weathering properties are not required. Read more »
SF-400 Partition Inserters
The SF-400 Partition Inserter family are available in models to match any manufacturing speed requirements. From low speed to high-volume production, these partition inserters are designed to run reliably and consistently even in 24/7 work environments. Handles corrugated or solid fiber materials.... Read more »
Shaped & Spouted Pouches
Shaped-beverage pouches are the latest creative packaging solution for the food and beverage industry. Polymer Packaging, Inc. is leading the development of shaped-beverage pouch solutions for everything from alcoholic cocktails to fruit drinks, and our customers are reaping the benefits.... Read more »
Shear Blades & Rotary Shears
We provide premium shear blades and rotary shears designed to meet the demanding needs of the metalworking industry with precision, durability, and exceptional performance. Our shear blades are meticulously engineered from high-quality alloys, with advanced heat treatment processes ensuring... Read more »
Sheet Stock
LAST-A-FOAM® is available in a variety of densities-from 5-50lb, standard and custom sheet sizes. Our specialist will match foam properties to consumer needs based on specifications and costs. Read more »
