Part Design Lessons
As plastic part assemblies become more sophisticated, individual part designs becomes more complex. This complexity can create challenges for part designers, as well as for mold designers and process engineers. Early in the part design phase, designers must establish design parameters, a necessary... Read more »
Part Sorting Equipment
General Description: A part diverter is used to change the direction of a shot of parts, the discharge of a complete cycle or cycles of parts from an injection molding machine. MAC Automation Concepts, Inc. currently offers two different styles of part diverters, also known as “part... Read more »
Part/Runner Separator
HFA's part and runner "Separators" come in 4-5 different styles, ranging from an "auger" to a "pin-belt". They are usually matched up with a feeding conveyor. Read more »
Part/Runner Separator
Screw Type Separators – A screw type separator is used to separate small parts from sub-runners, ideally suited for small to medium number of cavities and runners. A gap separation method is used between the screw and the adjustable angle slide plate. The smaller (shorter of the two pieces) fall... Read more »
Parts & Components for the Processing Industry
Maintaining your process is part of your daily routine. From preventative maintenance to replacing worn parts to system upgrades, sustaining your production capabilities is paramount to meeting your production goals. Our Service Solutions Representatives understand the cost and frustrations system... Read more »
Parts & Service
With a complete inventory of parts for every ZENO machine we sell, Eurohansa, Inc. insures the fastest possible response for service and support from right here in High Point, NC. Our technicians are available for helping you with troubleshooting and/or parts replacement and we even offer onsite... Read more »
Parts and Expertise – Available Worldwide
Uniloy can ship parts to any part of the world, with warehouse locations located in USA, Mexico, Europe, and India. We support ALL Uniloy machine lines with OEM parts. We are also in the unique position of having both the knowledge and documentation necessary to develop spare parts packages... Read more »
Parts and Upgrades
Davis-Standard offers multiple aftermarket services to support optimal processing. Equipment upgrades, replacement parts, global field services, custom engineering, research and technical services, and a 24/7 customer service hotline (844-MYDAVIS) are all part of Davis-Standard’s aftermarket... Read more »
Parts Assembly
From hand assembly to high speed automated assembly machines, Hoffer Plastics excels at multi-component part assembly for every customized need. Read more »
Parts Cooling Systems
Parts cooling can be provided on almost any TEC conveyor. This can be used for blow molded, thicker walled parts or any application where faster cooling is required. TEC offers the parts cooling by ambient or chilled air. Fans or blowers are mounted to either a lexan or SS cover. If chilled air is... Read more »
Parts Separators
Steel support frame Casters 3″ soft rubber swivel with locks Stainless steel adjustable infeed chute Stainless steel infeed and discharge rings Adjustable height and angle Enclosed motor and drive Removable lexan cover Pre-wired ready to plug in Single point adjustment Anodized aluminum Read more »
PBT
Thermoplastic Engineered Resin High chemical resistance Weatherability Good strength Balanced properties Crystalline structure Opaque Read more »
PC LEXAN 500R
LEXAN 500R, 10%GF,FR Form: RG Color: BLK Location: IL Weight lbs: 13500 Price per lb.: .78 Read more »
PC/ABS
PC/ABS is a blend of Polycarbonate and Acrylonitrile butadiene styrene that combines high heat resistance, impact resistance and tensile strength of PC with the easier processing and flexibility of ABS. This alloy is an excellent balance of the best characteristics and is highly sought in the... Read more »
PC: EREMA Plastic Recycling System
Up to 30% increased throughput with lower melt temperature of processed material with the same extruder size. Now possible due to a considerable change in the ratio between the cutter compactor chamber volume and the extruder size (patented). The enlarged cutter compactor chamber volume... Read more »
PDQ-H Series (3 brand products: PDQ, PS-PDQ-H, BDA)
PDQ-H is a non-toxic additive which does not contain regulated heavy metals. PDQ-H is currently being used in food contact applications worldwide. Advantages of Using PDQ-H • PDQ-H is aggressive in degrading multi-layer film • PDQ-H is an additive; only 1% - 3% by weight is required • PDQ-H can... Read more »
PDQ-M Series (1 brand products: PDQ-M)
PDQ-M is a non-toxic additive which does not contain regulated heavy metals. PDQ-M is currently being used in food contact applications worldwide. Advantages of Using PDQ-M • PDQ-M is works well with low molecular weight resins • PDQ-M is an additive; only 1% - 3% or less by weight is required... Read more »
PDV-2e/M
The PDV-2e/M is a portable color matching booth providing 4 light sources for critical visual color appraisal. The primary light sources are D65, cool white fluorescent (or TL84 if requested), incandescent (illuminant A), and UV. The PDV-2e/M is ideal for client presentations as it is easily... Read more »
PE Based Utility Black Color Concentrate
Polyethylene Based Utility Black Color Concentrate in truckload and less than truckload quantities stocked in our facility near Cleveland, Ohio. Read more »
PE Clear Film (Grade A 95/5)
We offer Grade A 95/5 PE Clear Film recycling services to support businesses in sustainably managing their polyethylene film waste. Our process accepts any mix of clear or natural polyethylene film, including Low-Density Polyethylene (LDPE) or Linear Low-Density Polyethylene (LLDPE), ensuring that... Read more »
PE Clear Film (Grade A 98/2)
We offer Grade A 98/2 PE Clear Film recycling services, designed to support businesses in responsibly managing polyethylene film waste. We specialize in recycling clear or natural polyethylene film, including Low-Density Polyethylene (LDPE) and Linear Low-Density Polyethylene (LLDPE), ensuring that... Read more »
PE Clear Film (Grade B 80/20)
We provide Grade B 80/20 PE Film recycling services to help businesses efficiently handle polyethylene film waste. We accept a blend of polyethylene films, including Low-Density Polyethylene (LDPE) and Linear Low-Density Polyethylene (LLDPE), with at least 80% clear or natural film content sourced... Read more »
PE(Polyethylene)
PE’s usefulness is due to its light weight, excellent chemical resistance, ease of processing, and relatively low cost. There are three basic types of PE resins:Low-density PE(LDPE); Linear low-density PE (LLDPE); High-density PE (HDPE) Read more »
PEARLCOAT®: TPUs for calendering and sintering
Under the trade name PEARLCOAT MERQUINSA offers a complete range of thermoplastic polyurethane elastomers (TPUs) for fabric coatings applications. The PEARLCOAT range accounts for an important share in all the segments where the melt coating process is used, among wich the following ones are... Read more »
Pearls
Our portfolio of pearls are very clean and brilliant – with all series available. We provide special effects at very special and competitive pricing. Standard 100, 200, 300 and 500 series are complemented by color shifting effects for eye catching product appeal. We also have a synthetic mica... Read more »
PEARLSTICK®: TPUs for solvent based adhesives
Under the PEARLSTICK® TPU trade name, MERQUINSA makes a wide range of linear thermoplastic polyurethane elastomers (TPUs), which have been specially developed for use as raw materials in the manufacture of solvent-based adhesives for the automotive, furniture, footwear, and other industries.... Read more »
PEARLTHANE®: TPUs for Extrusion, injection molding and compounding
Pearlthane® (thermoplastic polyurethane) TPU grades exhibit an outstanding balance of properties: • Excellent abrasion & scratch resistance • High tensile, compressive and tear properties • Low temperature flexibility and impact properties • Good oil and fuel resistance • Fast cycling for... Read more »
PEEK Plastic Polymers Rod Bar
Size is Customizable from 1.5mm to 250mm.PEEK Grade includes pure virgin PEEK, and glass or carbon filled. Read more »
PEEK Plastic Polymers Sheet Plate
To research and develop a satisfied product, primarily, you should select material reasonably. The followings may be your steps: 1.Analyse the applications of material: to learn the using requirements, including product features and application conditions 2.For application, to transfer the... Read more »
PEEKshrink®
Providing a “shrink to fit” layer of protection for sensitive critical components, PEEKshrink® tubing is used in a variety of applications such as wire coating for electronics, telecom hardware, medical devices and oil exploration equipment. This Zeus product has inherent purity and lubricity,... Read more »
PEEK™ Insulated Wire
High continuous operating temperature, excellent abrasion and chemical resistance and dielectric strength make Zeus’ PEEK™ Insulated Wire an ideal product for challenging environments. Typical applications of this Zeus product include magnet and winding wire for motors, generators and transformers.... Read more »
Peel Adhesion Testers
Packaging is mainly for the protection or preservation of contents—from physical damage or contamination and may experience wide variations in temperature from manufacturer to end user. Increasingly, it is designed to open easily by peeling rather than tearing. However, when peelable seals are... Read more »
PEKK 100
The high-performance polymer is based on an unfilled PEKK and shows higher elongation at break and impact strength while maintaining high tensile strength compared to the carbon fiber-filled material HT-23. At high operating temperatures in the range of 80-180°C, the material demonstrates its... Read more »
Pellet Classifier
Trendelkamp Pellet Classifiers are highly efficient systems that utilize a unique oscillating movement that prevents pellet bounce and increases process separation and quality. Read more »
Pellet Dryer, S+L
S+L ECON's pellet dryers, S+L, can be combined with the ECON water treatment and drying system, but they are also suitable for stand-alone operation. These dryers are often used in the recycling industry to dry bulk or mill material or flakes. These centrifugal dryers are characterized by their... Read more »
Pellet Mill
Our KAHL pellet machines facilitate storage and transport of your bulk products and product mixtures. Particularly fine-particle or dusty products are often a challenge when it comes to storage. Both the porosity and the volume require special measures – also during transport. Our KAHL pellet... Read more »
Pelletising systems
Over 2000 Erema hot die face water ring pelletisers in operation throughout the world, with throughputs ranging from 20 to 2000 kg/h, are proof of their value. The result of this wealth of user experience is the completely new, innovative Erema series HG 82/152/242/342, which stands out due to... Read more »
Pelletizer Knives
At AMERICAN CUTTING EDGE, our goal is to partner with our customers decrease their pelletizing production costs while offering high-quality pelletizing knives that are engineered to meet or exceed OEM standards. We specialize in working directly with our customers to analyze applications so we can... Read more »
Pelletizer Knives
We manufacture high-performance pelletizer knives designed to optimize efficiency and deliver consistent, high-quality results for all pelletizing applications. Crafted from premium materials such as high wear alloy tool steels, powdered metals, stainless steels, and advanced ceramics, our knives... Read more »
Pelletizing
To ensure a quick turn-a-round time for sharpening your strand pelletizers we have numerous CNC grinders. We utilize our 4 axis, 5 axis, and 6 axis CNC continuous path grinding machines with the latest software specifically for the sharpening and manufacturing of strand pelletizers rotors. Our... Read more »
Pelletizing
Davis-Standard helps customers achieve high quality pellets through field-tested experience in underwater pelletizing, water ring pelletizing and air ring pelletizing processes. Our modular extrusion and pelletizing solutions are ideal for conventional, micro and macro pellet production. Our... Read more »
Pelletizing Extrusion Lines
Bausano builds extrusion lines suitable for production of plastic pellets for subsequent moulding, extrusion or calendering, starting from virgin or recycled material. These Extrusion lines are fully customisable and highly efficient at any production output, thanks to the innovative extruders of... Read more »
Pelletizing Knives and Blades
Our mission is to decrease your pelletizing production costs while also offering a cost competitive knife. Using over 45 years of experience, we can use a simple formula to achieve lower production costs. Understanding your application + American Cutting Edge customized blades = superior... Read more »
Pelletizing Systems
Since the setting up in 1994, Nordson BKG GmbH has been offering comprehensive conceptions for underwater pelletizing. This special procedure is currently the most promising, innovative and, concerning the range of plastics materials to be processed, the most flexible technique for the production... Read more »
Pentaerythritol Tetrastearate: PALMESTER 3976
Abbreviation: PETS Application: Plastic compounding Function: As strong release agent, typically used in PC & ABS polymers, but also in PET, PA and other plastics Advantage: Does not affect the clarity in extrusion processes for plastic articles Plastic articles remain transparent & colour... Read more »
Perforating Blades
We specialize in manufacturing high-performance perforator knives that deliver exceptional precision and efficiency across industries such as printing, packaging, textiles, and food & beverage. Our perforator knives are crafted from premium-grade materials like alloy tool steels, D-2 high carbon... Read more »
Perforators
ADESCOR offers a wide range of perforators for pipe sizes of 50 mm up to 1500 mm ID. Hydraulic Punch, Drill, and Rotary Slot Perforators are available depending on the application. The perforators can be designed for use in-line with production or as a secondary operation off-line. Different... Read more »
Performance Anti-Oxidants
Anti-Oxidants for plastics and powder coating offer excellent oxidation resistance at an exceptional price. Our portfolio of Hindered Phenols and Tris Phospahates – both as stand-alone products or blends offer you wide formulating flexibility with great thermal stability. Always in stock and value... Read more »
Performance Light Stabilizers
We maintain good stock on the latest UV/HALS light stabilizers. We carry commonly sued and some specialized hindered Amine light stabilizers - all at the best prices. FIT-UV- 234 FIT-UV 326 FIT-UV-622P FIT-UV-770 FIT-UV 783 FIT-UV-944 Read more »
Performance Qualification
The qualification process is completed with the Performance Qualification (PQ) at your own location. After our meticulous qualification process, this comes down to an extensive yet simple check of the selected final process settings. This saves the time and money involved with shipping the mould... Read more »
